Skip to main content

Rainfall records and growing-season rainfall

Read rainfall by month and year, the last 12 months and growing-season rain, and import old rainfall records.

P
Written by Phase Team

Add or correct the rainfall for any day, read rainfall by month, year or the last 12 months, set your growing-season months, and bring in old records. It all lives in More → Paddocks & crops → Weather & Climate.

Add or correct a day's rainfall

You can enter rainfall for any day, for a manual gauge or a connected station such as a Davis WeatherLink. The year picker goes back 15 years. You need permission to edit the farm; without it, the days can be read but not tapped.

  1. Open More → Paddocks & crops → Weather & Climate.

  2. Select the Records tab.

  3. Choose the station or gauge in the station picker at the top.

  4. Choose the year in the year picker, then step to the month with the arrows beside the month name.

  5. Tap the day on the calendar or in the day list, or select Add record. With Add record, pick Today, Yesterday or type the Date.

  6. Enter Rainfall (mm). Min °C (optional), Max °C (optional) and Notes (optional) can stay empty.

  7. Tick Estimated (not an exact reading) if you are estimating.

  8. Select Save record.

Correcting a connected station. Phase keeps the station's own figure: the day shows Edited and "Station recorded 4.2 mm". To go back to the station's reading, open the day and select Remove record.

Deleting a gauge reading. On a manual gauge, Remove record deletes that day's entry. Phase asks first.

No gauge yet? Select Add gauge → Manual rain gauge, name it and select Create gauge. See Connect a weather station or rain gauge.

Rainfall on Overview

  • The Rainfall widget shows farm rainfall (the SILO grid over your paddocks) or a connected Davis WeatherLink or Weather Underground station against the long-term normal, with the same total as Weather & Climate. Pick the source at the top of the widget. It never shows a manual rain gauge.

  • The Rain gauges widget adds up every reading typed into your manual gauges this year, backdated ones included, and compares it with the same date last year. If you can't see it, select Customise → Widgets on Overview and switch on Manual rain gauges (see Arrange your Overview).

  • Earlier years for a gauge are in Weather & Climate → Records: pick the year, or switch the chart to Years.

Read rainfall in Weather & Climate

Overview shows one station or gauge: Last 24 h, Last 7 days, this month, the growing season, the year and Last 12 months, with Days since rain, frost days and heat days. Tap a month under Monthly rainfall to open its records. On Records, the chart switches between Days, Months and Years (the last ten years' totals).

Totals come from each station's saved daily record, so a DPIRD site isn't counted twice. For farm rainfall, DPIRD and BoM stations, a rain day ends at 9 am: overnight rain counts once, and rain after 9 am counts toward tomorrow. Davis and Weather Underground count midnight to midnight.

Rainfall by month, year on year

The Climate tab shows farm rainfall against the long-term normal. Its Annual rainfall history chart has two views: Totals, the yearly totals, and By month, which draws each year as one ridge, January to December, newest at the front, so wet winters and dry springs line up down the page.

  • Every year uses the same scale. Ridges are shaded by the year's total, deeper blue for a wet year, with the total at the end of the row.

  • If you have more than one farm, the farm buttons above the chart switch between them. Each farm uses its own SILO grid, so you can compare one farm's seasons with another's. 10 years, 20 years and 30 years set how many years show.

  • Point at a ridge, or tap it, to read the month's rain, its normal, the year's total and its decile.

  • This year is a dashed outline marked "so far". A very wet month is cut short, with its real total printed above it.

If a farm's history isn't loaded yet, someone who can edit the farm sees Load rainfall history. It loads the SILO record from 1950, takes about a minute, and doesn't change the rest of the Climate tab.

Farm grid or a nearby station. Climate uses the farm grid unless someone who can edit the farm selects Use a station instead to choose a nearby long-term rainfall station (Use farm grid goes back, Change station picks another). They also see Refresh recent and Load full history (1889). Compare station vs grid shows the two records side by side.

Rain over the last 12 months

  • Weather & Climate → Overview shows Last 12 months beside the year total when the current year is picked, with its dates, such as "18 Oct 2025 – 17 Oct 2026". It runs up to and including today and starts the day after the same date last year, so no day is counted twice.

  • A station or gauge with less than a year of records reads "Since 5 Jul 2026" instead, so a few months aren't mistaken for a dry year.

  • On the Overview Rainfall widget, tap the period at the top (such as 2026 YTD) and choose Last 12 months. The figure, the difference from normal and the curve follow. Phase remembers this for that farm on that device.

  • Farm rainfall always has twelve months. A connected station needs a year of records first; until then it reads "Last 12 months (needs a year of records)".

  • Phase Agent answers "rain in the last 12 months" over the same window.

Choose the growing-season rainfall months

Growing-season rainfall adds up April to October unless you change it, for example to March to December, or May to February for a crop harvested in the new year. Anyone who can edit the farm can change the months.

  1. Open Growing season months from any of these:

    • the farm-and-season button at the top right: in the Seasons panel (Manage seasons on a phone), select Change beside Growing season rainfall

    • Weather & Climate → Overview → Change months under the growing-season figure

    • Weather & Climate → Climate → Change months on the Growing season rainfall chart

  2. Choose From and To.

  3. Select Save. Use April to October goes back to the default.

Every growing-season figure follows your months: the figure on Overview (named after them, such as "May–Feb (growing season)"), the Growing season rainfall chart, Yield Centre's water use efficiency and yield forecast, and the production report and its export.

  • A season over New Year belongs to the year it is sown: May 2026 to February 2027 is the 2026 season, with 2026's yields.

  • A gauge or station counts a season only when every day of it has a reading.

  • The months are one farm-wide setting. Summer and winter crops use the same months. Nothing needs to reload when you change them.

Import weather records

  1. In Weather & Climate, on the Overview, Records or Stations tab, select Actions → Import data (or Import data above the day list on Records).

  2. Choose the station or gauge under Import into station. It can be a connected station.

  3. Bring the records in one of two ways:

    • A spreadsheet: select Choose file under CSV or spreadsheet, match the columns, then select Preview rows.

    • A photo of a rainfall sheet (printed or handwritten, month by day): set Sheet year (photo import) first, then select Add photo under Photo of a rainfall sheet. Phase reads the sheet.

  4. Review the rows. You can change a rainfall figure before you import.

  5. Under Days that already have a record, choose Keep existing or Overwrite.

  6. Select the import button. It shows how many days will be saved, such as Import 31 records.

  • A blank rainfall cell is saved as no figure, not 0 mm, and with Overwrite it doesn't replace a figure the day already has. A cell with text such as "T", "n/a" or "-" is left blank too, and the row says so.

  • Dates such as "05/03/2024 09:00" or "5.3.2024" are read day first, as 5 March.

  • A logger export with several readings a day becomes one day: rain added up midnight to midnight, with the lowest and highest temperature. Check the rain column is each reading's rain, not a running total.

  • The review shows Rainfall, Min °C and Max °C, and marks a row Check with the reason, such as extreme rain, an unlikely temperature or a future date.

  • A large phone photo is made smaller before it is sent, so it uploads.

  • With Keep existing, days that already have a record don't change. Importing needs permission to edit the farm.

Good to know

  • Adding or editing records needs permission to edit the farm.

  • A day with no reading counts as no record, not 0 mm. But in the record box, an empty Rainfall (mm) saves as 0 mm.

  • You don't type rainfall for Yield Centre's water use efficiency. It uses the farm's SILO grid unless you choose a station in Yield Centre. See Yield forecast, water use efficiency and grain prices.

If something doesn't look right

  • The Rain gauges widget shows 0 mm but the gauge has entries. Reload Phase.

  • My manual gauge isn't in the Rainfall widget. It never shows manual gauges; use the Rain gauges widget.

  • Last 12 months can't be picked. The station needs a full year of records first.

  • The Rainfall widget says Rainfall isn't set up yet, Add a field boundary or Rainfall needs setup. The farm needs a paddock with a boundary, then someone who can edit the farm opens the widget (Set up rainfall or Open rainfall). It prepares once, then stays up to date.

  • A connected station is missing months. See Connect a weather station or rain gauge. Don't type the months in by hand.

Related

Did this answer your question?