See every truck of a harvest once, whoever recorded it: loads logged in Phase, every load CBH LoadNet weighed, and grain transferred at CBH, as a table or on a calendar beside the truck runs planned. Sort and filter them by quality, sort out loads with no paddock, and delete a load logged by mistake.
Where is it? More → Paddocks & crops → Yield Centre → Loads. Choose Table or Calendar at the top of the tab (List or Calendar on a phone). More → Daily work → Trucking opens the calendar. Record load at the top records a new load (see Log a harvest load). Import at the top brings in a whole harvest of loads at once (see below).
Does a load show as the paddock's yield straight away? A paddock with loads and no other yield figure shows the yield its loads give straight away. Which tonnes a paddock uses, the header's or the loads', follows the farm's Harvested | Delivered choice. It reads Yields from at the top of the Overview and Yield tabs (see below).
Before you start
Recording, editing, deleting or weighing off a load, and adding a transfer, need permission to edit Inventory.
Record as yield, Use as yield, choosing a CBH load's paddock, putting a CBH load on a contract and confirming bin codes need permission to edit the farm's records.
CBH loads need CBH LoadNet connected, which only the farm's owner, a co-owner or an admin can do. See Connect CBH LoadNet.
Which harvest it shows
Loads follows the harvest chosen at the top of the Yield Centre, such as 2026 harvest. A line at the top adds it up, such as "Delivered 420 t in 14 loads · Into your silos 96 t · Transferred −20 t". Each truck counts once, at CBH's weight when CBH weighed it.
A harvest with no loads yet says "No loads for the 2026 harvest yet" and how loads get there: one at a time with Record a load, a whole harvest at once with Import loads, or on their own with Connect CBH LoadNet.
Import a whole harvest of loads
Use this when your grain goes to a handler or buyer other than CBH, or to catch up on a harvest already delivered. CBH's loads come in on their own through CBH LoadNet.
On the Loads tab, select Import at the top. Record load → Import loads and Actions → Import loads (the way in on a phone) open the same window.
Select Choose files and choose one of two things:
A delivery summary from your handler's or buyer's website, as a CSV or Excel file with a row for each load. Look for deliveries or tickets on their site, then Export.
The dockets themselves: weighbridge tickets or receival dockets as PDFs or photos, as many as you like. A PDF with a lot of tickets in it is read ticket by ticket, each one its own load.
Wait while Phase reads them. A long PDF of tickets can take a minute or two.
On Check the loads, read each load: its date, crop and grade, tonnes, site, docket number, truck and quality tests. For a spreadsheet, a line says which columns Phase read and which it did not use.
Under Who took the grain?, type the handler or buyer if the file only names the site. It goes in front of each site.
Pick paddocks if you know them. Each load has Came off, and one box sets a paddock for every load that has none, or every load of one crop. Pick the paddock later is fine.
Select Save 14 loads. Nothing is saved until you do.
Loads imported says how many were saved and their tonnes. Undo this import takes every load from that import back out. Pick paddocks opens Needs a look.
Nothing is counted twice. A load whose docket number is already in Phase is left out as Already in Phase, and one that repeats in the file as Twice in this file. You can bring the same file in again later and only the new trucks are added. Show the loads left out lists them.
Kilograms are turned into tonnes. A file with gross and tare but no net has the net worked out.
A paddock in the file is used only when it is plainly one of yours. Otherwise the load is saved with no paddock and waits under Needs a look.
Imported loads are ordinary logged loads. Open, edit, put on a contract or delete them like any other. They read Logged in Phase under Weighed by.
A single docket is kept with its load in Documents. A PDF of many tickets is not kept against each load.
Choose one spreadsheet, or any number of dockets, not both at once. Hay in bales is not read from a file.
Pick what the table shows
A bar over the table picks a slice, each with how many loads it holds:
All loads: every load of the harvest. The loads that need a look are one line, such as "11 loads need a look", with Show them.
Needs a look: every load to fix, with the button that fixes it, then Paddock codes from the bin.
Delivered: every truck that left the farm, with the delivered figures by crop and By receival site under it.
Into your silos and Transfers: just those loads, once there are some.
Read the table
Each row is one truck: Date, Time, From, To, Crop, Variety, Grade, Tonnes, the quality readings (Protein %, Moisture %, Screenings %, Test wt kg/hL, and Oil % and Falling no. s when any load has them), Grade limits, Weighed by, Load no., Truck or carrier, Contract, Counted and Needs a look.
Weighed by is CBH LoadNet, Logged in Phase or Docket photo. A truck you logged that CBH also weighed is one row, counted once, at CBH's weight.
Grade limits checks each load against CBH's receival standards for the grade it went in at. A load near or past a limit says Near a grade limit or Past a grade limit, with the test, such as "Screenings 5.0% near H2's 5.0% limit". It is a guide from the published standards, not CBH's decision on the load.
Contract names its contract, or Split: #4412, #4418 for a load split between two.
A load off more than one paddock reads, for example, "Split: North 12 t · South 8 t".
Click or tap a load once to open it. Tick loads to read their count and sum; a bar above the table has Copy and Export and, if you can edit, Pick paddock, Use suggested paddock, Move to this harvest, Record weight and Delete.
Group, sort, search and filter
Group loads by Day, Paddock, Crop, Site or Weighed by, each group with its subtotal (readings averaged by tonnes). Grouped by Paddock, each paddock's Use as yield or Update yield line sits above the table.
On a computer, sort or filter any column from its heading. On a phone, Sort beside the grouping lists loads by Protein, highest first, Protein, lowest first, Screenings, highest first, Moisture, highest first or Tonnes, most first; sorting by a reading makes one ranked list.
Search finds a paddock, docket or load number, truck or note.
Filter narrows by Delivered to, Crop, Paddock, Recorded by, Needs a look, Truck or carrier, Grade limits, Protein (by whole percent, such as 11–12%) and Screenings.
Export saves the loads in view.
See loads on the calendar
Choose Calendar. A month shows each day's loads, how many and the tonnes carted, and the truck runs planned or booked for it. Tap a day to list its runs and loads underneath. Plan a truck run and Print sit above the month. See Plan truck runs.
Fix the loads that need a look
Choose Needs a look. Each load has the button that fixes it:
No paddock: Phase suggests the paddock the load likely came off, from the harvest just before CBH weighed it (or that day, for a load logged in Phase). Imported loads saved with Pick the paddock later are listed here too; they already count as delivered. Select Use North 1 (two buttons when two paddocks fit), or Pick another. With two likely paddocks, Split opens the load on a split between them, already filled from each paddock's harvesting before the load. Ticked loads can Use suggested paddock together.
Wrong harvest?: a load filed under a harvest it can't be in. Select Move to 2026.
Not weighed: a load saved on the loaders' estimate. Select Record weight when the docket comes back.
Which harvest a load goes to. The harvest its date and that paddock's crop say, not the season Phase is set to, and not a CBH docket's "Season". A CBH LoadNet load goes under the harvest of the day it was delivered.
A paddock's loads and its yield
Under each paddock's harvest (Yield → List → One season, or a harvest's details under Source), a loads line says where its tonnes came from, each with its own chip: "Loads: CBH 49.3 t · 1 load + Manual 150.6 t delivered · 3 loads = 2.07 t/ha over 72.8 ha". CBH LoadNet loads you put on a paddock (choosing it, splitting the load, or a bin code you confirmed) count as that paddock's loads. A CBH load Phase only lined up by harvest time gives the paddock quality only.
On Harvested, a paddock with no machine, map, typed or imported figure shows the yield its loads give.
On Delivered, every paddock with loads shows the yield its loads give, over its area.
Record as yield still shows beside loads that no figure carries yet, on Yield → List → One season. Select it, check Area harvested (type the hectares if only part was cut), then Confirm yield record. Grouped by Paddock, Use as yield does the same. Half a paddock for hay, the rest for grain: record the hay loads over the hectares they came off, then the grain over its own.
Open a load
Click or tap a load. A logged load shows its details and the docket if one was filed, with Edit load, Record delivered weight (on an estimate) or Delivery details, Counts toward a contract (see Contracts and transfers in Yield Centre), Log next load and Delete load.
A CBH load shows CBH's weighbridge time, site, grade, varieties and net tonnes, then Quality: every test CBH sent, with a scale for each one the grade limits. If you also logged that truck, Open the logged load goes to your copy.
Delete a load
Open a load you logged in Phase and select Delete load, or tick several and select Delete.
Phase asks first. Confirm, and it puts each load's tonnes back where they came from.
CBH's loads can't be deleted, because CBH's record is the source. A load turned away by the site is better recorded as Turned away than deleted (see Log a harvest load).
Which paddock a CBH load came off
Phase places each CBH load on a paddock in this order:
The paddock you chose. Open the load. Under Which paddock did it come off?, tap a paddock, or Split between paddocks for a truck off two or more (see Connect CBH LoadNet). No single paddock reads "Out of storage, or a mix you can't split". Let Phase match it undoes your choice.
A bin code. Under Needs a look, Paddock codes from the bin lists the codes written at the bin. Obvious ones (a paddock's whole name, its initials or its number, with no other paddock close) Phase confirms itself; the rest wait for you.
Harvest time. From John Deere harvest jobs and Phase's own harvest records: the paddock harvested in the hours before the load was weighed. If two paddocks fit, Phase asks rather than guesses.
Delivered figures
Choose Delivered in the bar, or Delivered by crop in the top line. Under its loads: Delivered (tonnes), Loads, Average load and Crops; a chart of how the harvest came in day by day; a card per crop split by Grades, Varieties or Sites; and By receival site: each site and crop, its tonnes and loads, and its protein, moisture, screenings, test weight, and oil or falling number where tested, all averaged by tonnes.
Good to know
Grain into your own silos hasn't left the farm, so it counts as Into your silos, not left the farm. It is still one of the paddock's loads on Delivered.
A transfer at CBH changes Transferred only, never what you harvested or delivered, or anything in your silos.
Dockets CBH deleted aren't listed and count for nothing.
The Deliveries tile on the main Overview opens Loads.
If something doesn't look right
"Connect CBH LoadNet" shows. The farm isn't connected. The owner, a co-owner or an admin can connect it from there or from Actions → CBH LoadNet deliveries. If you don't deliver to CBH, use Import loads or Record a load instead.
A load is in the wrong harvest. Use Move to under Needs a look.
A paddock's yield didn't change after logging loads. It has a machine, map or typed figure, and the farm is on Harvested. Flip Yields from to Delivered on the Overview or Yield tab, or select Record as yield beside its loads.
I can't find Harvested | Delivered on Loads. It changes nothing on Loads or Storage, so it isn't shown there. It is at the top of Overview and Yield.
"Phase could not find loads in that file". A spreadsheet needs a row of headings with a net weight, and a date or a docket number, then a row for each load. Save it as a CSV or an Excel file and try again.
An imported load is missing. Select Show the loads left out on Check the loads. It was already in Phase, twice in the file, or had no weight.
I can't find Summary or double-click. One click or tap opens a load. Contracts are one list on the Contracts tab.
"This paddock has no area recorded". Phase can't turn tonnes into t/ha. Type the Area harvested, or set the paddock's area (see Draw, import or export paddock boundaries).