Connect CBH LoadNet and every load CBH weighs for your farm comes into Phase by itself, with its weight, grade and quality exactly as CBH recorded them. There is nothing to type in or upload. Connecting takes two steps: share your loads with Phase in LoadNet, then give Phase your CBH account numbers.
Before you start
Who can connect. Only the farm's owner, a co-owner or an admin can connect CBH LoadNet, change its accounts or disconnect it. The page calls this "the farm's owner or a manager". Everyone else on the farm can see the loads once it is connected.
What you need. Your LoadNet sign-in, and your CBH account number (digits only, like 12345678). It is on your LoadNet account and your CBH statements.
Other receival sites. Only CBH is connected. Record loads to other bulk handlers yourself in Phase; see Log a harvest load.
Where to find it
More → Daily work → Work reconcile → CBH LoadNet. The path is the same on a computer and a phone.
Or More → Paddocks & crops → Yield Centre → Actions → CBH LoadNet deliveries.
The row on Data Feeds reads Not connected until the farm is connected. Then it shows when Phase last checked CBH, and how many loads are to sort, or Up to date.
Step 1: Let Phase see your loads in LoadNet
Sign in to LoadNet and go to Business details → Data sharing.
Under Public, choose Phase Ag from the API consumer list.
Press Add API consumer.
Scroll down to the bottom of the page and press Save. This is the step people miss. Phase can't see your loads until you save.
If you deliver under more than one CBH account, do this for each one.
Step 2: Give Phase your account numbers
Open More → Daily work → Work reconcile → CBH LoadNet.
Type your account number in CBH account numbers. Separate more than one with commas, for example
12345678, 23456789.Press Connect. The page shows Connected and "Your loads arrive after Phase's first check, within the hour."
The first check brings in this harvest and last harvest. A Deliveries tile is also put on your Overview, on the device you connected from. Anyone else can add it with Customise on their own Overview.
The Deliveries tile counts the loads of the season picked at the top of Phase. Before the first load of a new harvest it reads, for example, "No loads delivered yet in the 2026 harvest", and it counts up from the first load. To see last harvest's deliveries, pick that season at the top, or open the tile for the Yield Centre's Loads.
Check the connection
Once connected, the CBH LoadNet page shows:
Account (or Accounts), Last checked, Loads this harvest, Loads last harvest and Latest delivery.
To sort, when there are loads Phase couldn't place on a paddock. They still count in your delivered totals but give no paddock their tonnes or quality yet. Choose their paddocks on Loads, under Needs a look opens Yield Centre's Loads straight on Needs a look, each load with Phase's likely paddock (Use …) or Pick paddock.
Accounts and sharing, with Change account numbers and Disconnect (owner, co-owner or admin only).
Your loads themselves are in More → Paddocks & crops → Yield Centre → Loads, each with CBH's load number (the number on its docket). See Loads in Yield Centre.
Put CBH loads on their paddocks
A CBH load you put on a paddock counts as one of that paddock's loads: its tonnes on the Delivered side of the farm's Harvested | Delivered choice, and its quality on the paddock. A load Phase only lined up by harvest time gives quality only. A load of a different crop from the paddock's plan that season is never made its yield.
Choose the paddock. Open the load on Loads and tap a paddock under Which paddock did it come off?, then Save paddock.
Split a load between paddocks. Under Which paddock did it come off?, tap Split between paddocks. Each line has its paddock, its tonnes and an ×; Add another paddock adds one, the last line takes the rest of the load, and Split evenly and By paddock size fill the lines. Select Save split. CBH's weight is the load, so there is nothing else to type, and its tonnes still count once in your delivered totals. "Quality goes to" then reads, for example, "North 60% · South 40%, as you split it". Let Phase match it takes the split off again.
Paddock codes from the bin. Under Needs a look on Loads, Paddock codes from the bin lists the codes written at the bin. Phase confirms a code itself when it reads as one paddock's whole name, its initials or its number, no other paddock comes close, and that paddock grew the crop (when its harvests are on record). A note says which codes it matched, such as "N1 means North 1". Codes that could be two paddocks still wait, with a Use … button for Phase's suggestion. A code Phase matched says matched by Phase, with Not this paddock to send it back for you to choose.
Read each load's quality against CBH's limits
Every CBH load is read against CBH's 2026/27 receival standards for the grade it went in at. Open Yield Centre → Overview and find 2026 quality under Where the harvest is. It follows the harvest chosen at the top of the Yield Centre, shows for the whole farm only (not when the page is narrowed to a property or paddock) and follows the page's crop filter. A switch picks how to read it:
Season: a strip per test for one crop, a dot a load, with the limit of the grade most of that crop went in at drawn as a dashed line and the side past it hatched. Press a dot to open that load in Per load.
Per load: every CBH load of the crop. Each shows the test closest to its limit, how far inside it sits and what the load drops to past it, such as "1 under H2's limit of 10 · Over it, the load drops to FED1". Loads are ordered Nearest a limit (or Newest) and tagged Near a limit, Past a limit or Clear, and a line at the top says how many are near or past one.
Tap a load, or All N tests, to open every test CBH sent, each on its own row: protein, moisture, screenings and the rest of CBH's standards, such as unmillable material, small foreign seeds, sprouted grain, ergot and insects. Each test the grade limits gets a scale with the reading, the limit and what the load drops to past it. A test the grade sets no limit on is listed with its figure, under for example "No APW1 limit on record for these". Close folds it again. A CBH load opened on Loads shows the same Quality section.
Limits are held for wheat, barley, canola, lupins and oats. Malt barley graded by its variety is read against MALT1's limits. Moisture is CBH's base limit; higher limits some sites open on notice aren't shown.
The grade a load drops to assumes only that test changed, and that its variety can go there.
CBH sends some counts, such as stained grain or field fungi, only when it finds some, so a load without one had none.
A grade not on CBH's sheets shows its readings with no limit. A few tests CBH doesn't name with their unit show as a plain figure.
Loads from last harvest are read against the same 2026/27 standards.
Per load lists CBH loads only. A load logged in Phase has no CBH test sheet, though a protein typed on it still shows on the Season strips.
The quality strips used to sit at the bottom of Loads, and some tests were squeezed into one Also tested line. Since 29 October 2026 every test has its own row, and the tests Phase didn't read before count toward Near a limit and Past a limit too. So a load that read Clear before can now read Near a limit: open it to see which test.
What LoadNet doesn't send. CBH sends each load's weight, grade, varieties and quality, but no contract, buyer or transfer details. Put CBH loads on your sale contracts in Yield Centre, and add grain you transferred to or from another grower at CBH with Actions → Add a transfer or adjustment. See Contracts and transfers in Yield Centre.
How often Phase checks. Phase asks CBH only for loads that are new or changed: every hour from October to January, and once a day at 8 am (Perth time) the rest of the year. A load CBH changes later, such as a regrade or a deleted docket, comes through at the next check.
Add another CBH account
In LoadNet, share the new account with Phase Ag (step 1 above, including Save at the bottom of the page).
On the CBH LoadNet page, press Change account numbers.
Add the new number, separated by a comma, and press Save.
Disconnect CBH LoadNet
On the CBH LoadNet page, press Disconnect.
Read the message and press Disconnect again to confirm.
Phase stops checking CBH and stops showing the farm's CBH loads straight away. It then deletes them, with any paddock codes you confirmed, within the hour. If you want a copy, use More → Settings → Export everything first.
Connecting again brings in this harvest and last harvest again. The paddock codes you confirmed were deleted, so you would confirm them again. To stop CBH sharing with Phase altogether, also remove Phase Ag under Business details → Data sharing in LoadNet and press Save.
If you only remove Phase Ag in LoadNet. Phase stops showing that account's loads at its next check. It keeps them until sharing comes back or you disconnect in Phase, and the CBH LoadNet page says how to do either.
What Phase keeps, and who sees it
Phase never sees your LoadNet password. It can read your loads but can't change anything in LoadNet.
Phase keeps only the parts of each CBH record it uses: the load number, when and where it was weighed, the crop, grade and net weight, its quality results, the varieties and paddock codes recorded with it, and whether CBH deleted it.
It does not keep the payment, contract, marketer, truck or nomination details CBH can also send.
Your CBH information is stored only in Australia. It is never sent to an AI service or used to train one, and isn't shared with anyone outside your farm. Phase Agent does not read your CBH loads.
For the full detail, see the CBH LoadNet deliveries section of Phase's Privacy Policy at https://www.phase.ag.
Good to know
Paddock codes stay with their paddock. Split a paddock and its confirmed codes go to the larger new paddock. Merge two and the second paddock's codes go to the main one when you bring across its plans or history. See Merge, split or delete a paddock.
CBH loads and a paddock's yield. A CBH load counts toward a paddock's yield only once it is on that paddock (your choice, a split or a confirmed bin code), and only when the farm is on Delivered, or the paddock has no harvested figure. A load logged in Phase that LoadNet also sent counts once, at CBH's weight.
If something doesn't look right
"CBH isn't sharing account … with Phase". Phase has stopped showing that account's loads. In LoadNet, check Business details → Data sharing lists Phase Ag for that account, and that you pressed Save at the bottom of the page. Phase tries again within a day. To have Phase delete what it holds instead, disconnect.
"… doesn't look like a CBH account number". Type digits only, like 12345678, with commas between accounts.
"One of the account numbers below isn't a CBH account number." Check the numbers against your LoadNet account or a CBH statement, then press Change account numbers and save again.
"Phase couldn't reach CBH at the last check." There is nothing to do. Phase tries again within the hour.
"CBH didn't let Phase in at the last check." That is on Phase's side, not yours, and is being looked at.
No loads an hour after connecting. Check step 1 again, especially Save at the bottom of the LoadNet page.
"Only the farm's owner or a manager can connect CBH LoadNet." Ask your farm's owner, a co-owner or an admin to set it up.
The Deliveries tile isn't on your Overview. Add it with Customise. See Arrange your Overview.
The Deliveries tile says no loads delivered yet, but last harvest had plenty. It counts the season picked at the top of Phase. Pick last season to see last harvest's deliveries.