Skip to main content

Ask Phase Agent about soil, rain, spray windows and labels

Ask Phase Agent about soil tests, rainfall, spray and spreading windows, and what a chemical label says.

P
Written by Phase Team

Phase Agent (Agent in the main menu) can check your soil tests, your recorded rainfall, the forecast for your paddocks and the registered label for a chemical, then answer in plain words with a chart, map or label extract. Use it for a quick read of the records before you make a call. It doesn't set lime or fertiliser rates, and the label on the container always has the final say.

Before you start

  • Phase Agent comes with Phase Pro, Phase Ultra and the free trial. It isn't available on an Advisor Managed farm.

  • Answers come from what's in Phase: your soil tests, rainfall from your stations or SILO, and the labels in the Phase Library. Agent says what's missing.

  • Spray and spreading windows need each paddock to have a saved location on the map.

Ask about soil results

Ask "Compare potassium across Banksia Downs" or "Which paddocks have low sulphur?" and Agent checks the recorded soil tests for that farm, or for every farm in the account, in one go.

  • Depths and units are kept separate rather than averaged together.

  • The answer shows each sample date and which paddocks have no result.

  • The map with the answer shows the sampling sites behind the result, not only the paddock outline. Only sites for the paddocks, dates and depths in that answer appear, and a site needs a recorded location or boundary to show.

  • Soil readings on their own don't tell you a fertiliser need or an application rate, and Agent doesn't give one.

Find which paddocks need an acidity check first

Ask "Which paddocks need an acidity check first?" or name the paddocks. Agent gives an investigation shortlist, not a lime rate. For each paddock it shows:

  • the sampling depths and the sample dates

  • the pH method (calcium chloride and water results are shown separately and never ranked against each other)

  • any lime recorded since the test

  • links to the Australian sources it relied on.

A test taken before a later lime application is flagged as needing a fresh sample, rather than pushed to the top. Missing information stays visible. The shortlist doesn't set a lime rate or create a prescription. A follow-up such as "and their canola yields last year?" keeps the same paddocks. The same shortlist is available in Crop Plan Studio's Agent tab and in Phase Spatial's agent panel.

See soil results over time

Ask "Show my soil pH results over time", or potassium, sulphur and so on.

  • Agent draws a chart for each paddock and sampling site, with each sampling depth as its own line, unless you asked for one depth.

  • Tests sit at their real dates. A depth not sampled on a date is left out, not drawn as zero.

  • Different units and pH methods are never put on the same chart.

  • The pH scale runs in whole numbers around the readings, so readings from 3.8 to 7.1 show on a 3 to 8 scale.

  • Recorded values under each chart lists every reading.

Ask how much rain you've had

Ask "How much rain have we recorded this year?" or "How much rain at Banksia Downs since April?" Agent answers from recorded rainfall, with a bar chart by month and the Recorded rainfall total. Recorded values under the chart lists each month.

Which gauge it uses. For a named farm, Agent uses the station chosen for that farm in Yield Centre (Rainfall for production), or the one station whose name matches the farm, or else the farm's SILO rainfall. If more than one station could apply, it asks which. Rain from separate gauges is never added together. With no farm named, it uses your default station, or your only one.

Gaps in the record. A month with days missing is marked with an asterisk and counted as a recorded subtotal, so the real total is at least that much. The total under the chart is then labelled Recorded subtotal with an asterisk, instead of Recorded rainfall. A day the station never sent is not counted as 0 mm.

Periods.

  • "This year" runs from 1 January to today.

  • "Last week" is the last full Monday to Sunday week. "The past seven days" is the seven days to today.

  • "Rain in the last 12 months", "past twelve months" or "12-month rolling total" adds up the twelve months to today, starting the day after the same date last year. That's the same window as Last 12 months in Weather & Climate.

Coldest and hottest days. "What's the coldest it has been this year, and when?" is answered from every saved day of the period: the coldest and hottest day with their dates, the number of frost days and the strongest gust.

Ask how much rain fell since a spray

Ask "How much rain since I sprayed Creek Flat?", "Has the urea washed in?" or "Which wheat paddocks got more than 20 mm after their last spray?" Agent counts rain from the paddock's last spray, seeding, spreading or job, or from a date you give. Ask about one paddock, up to 10 named paddocks, or every paddock of one crop in a season.

  • You get a firm total only when every day was recorded. Otherwise the answer says "at least" that many millimetres and names the missing days.

  • With a cut-off such as 20 mm, Agent lists the paddocks over the line, under it, and those it can't prove either way.

  • It says which station stood in for each paddock. Rain on the day of the job may have fallen before or after the job, and Agent says when that's unknown.

Ask about spray and spreading windows

Ask "When can I spray?", "Can I spray Creek Flat tomorrow morning?", "Good day to spread urea Thursday?", "Right to bale on the weekend?", "When can I seed?" or "Will we get a frost?"

Agent checks the live forecast for your own paddocks, using the same outlook as the Conditions widget on Overview. It gives a verdict for each day, such as Go, Watch or Avoid (the widget itself says Within limits, Watch or Outside limits), plus:

  • the next workable window and what is limiting it (wind, gusts, Delta T or rain)

  • frost risk and rain ahead.

  • the hour-by-hour humidity, temperature and wind for the next two days, so "When is the humidity next above 62%?" or "How cold does it get tonight?" gets an answer.

Agent uses the widget's standard limits, not limits you've tuned in the widget, and says so. A paddock without a saved location gets a plain "no location" answer rather than a guess. This is guidance from a forecast, not a spray recommendation.

Harvest and vehicle bans. Asked "Any chance of a harvest ban?", Agent explains the forecast fire risk but can't check whether an official ban is in place. Always check the current official ban notice for your area before you start.

Ask what a chemical label says

Ask whether two products can go in the same tank, what the withholding period is, or how long before you can sow after a spray. Agent answers from the registered label on file in the Phase Library, using the label's own compatibility, withholding, plant-back and mixing sections. It names the label version it read and gives the link.

  • It never says two products are compatible unless the label text says so, and it doesn't fill a gap in the label from memory.

  • Ask with the exact product name or strength. If several products match, choose the right one. Once you've picked, or answered "yeah" or "no" when Agent checks which product you meant, it carries on with your original question, including the crop you asked about.

  • Under a label answer, a button with the product's name opens the label.

Withholding periods. Ask "What's the harvest withholding on the tebuconazole for wheat?" or "Can I graze after that spray?" Agent gives the period the label sets for that crop (harvest, grazing and export slaughter interval where the label has them), with the label's own words beside each.

Plant-back. Ask "How long after the pyroxasulfone pre-em before I can sow canola?" Agent gives the label's plant-back rule for that crop: the interval, plus any rainfall, rate band or soil pH the label attaches, with the label's words and page.

For both:

  • If the label doesn't name your crop, Agent says so and lists the crops it does name.

  • If the label's rule is for "all other crops", Agent shows that line and leaves you to judge whether your crop falls under it.

  • If the answer is in a table Phase can't read from the label text, Agent says the table has to be read on the label.

  • It never carries a period or interval over from one crop to another, and it never says a paddock is clear to plant.

  • These are the same periods and rules Crop Plan Studio's harvest withholding check and Found on the label plant-back rows use, so the two agree.

Rainfast. If the label on file gives no rainfast period, Agent may quote the manufacturer's Australian technical guidance instead, with a link, and says plainly that it's the manufacturer's guidance, not the label. If neither has one, it says what's missing. It never says a product isn't rainfast because nothing was found.

Mixes. Ask about several products at once and Agent keeps each product's findings (rainfast, withholding and mixing restrictions) under that product, and answers every check you asked for. A known restriction still shows when another product in the mix couldn't be identified. One product's rainfast period never stands for the whole mix. A rate the label mentions is shown for you to check, not as approval of your rate.

Good to know

  • Every answer that used a label ends with a short notice, even when no label was found: Phase read the registered label on file, which may not be the latest version; the label on the container is the legal document and overrides anything Phase says; check rates, tank-mix compatibility, withholding and plant-back on that label and with your agronomist before you mix or apply; and this isn't agronomic advice.

  • Agent reads current labels only. Products taken out of the Phase Library, such as household pest sprays and baits and a handful of turf-only products, no longer get label answers.

If something doesn't look right

  • Agent says a paddock has no location. Draw or import the paddock boundary on the Map, then ask again.

  • The rainfall total has an asterisk. Some days are missing from that station, so the figure is the least that fell, not the full total. Recorded values shows which months are short.

  • Agent asks which rain gauge to use. More than one station could apply. Pick one, or set the station for that farm in Yield Centre under Rainfall for production.

  • Agent says there's no label for a product. The label isn't on file for that product, or the product wasn't matched. Ask again with the exact product name and strength, and read the container label. See Find a product's label and safety data sheet.

  • A soil site isn't on the map. It has no recorded location or boundary.

Related

Did this answer your question?