Skip to main content

Speak to Phase Agent and drop a pin

Talk to Phase Agent instead of typing, ask about the paddock you're standing in, and drop a pin there to mark something.

P
Written by Phase Team

You can talk to Phase Agent instead of typing, and hear its answers spoken back, which helps in the ute or out in the paddock. You can ask about "this paddock" or "here" and Agent works out which paddock you're standing in, and you can say "there's a rock here, mark it" and Phase drops a pin where you're standing. This article covers all three.

Before you start

  • Speak is on the Phase Agent page (Agent in the main menu) for everyone who has Phase Agent. Phase Agent comes with Phase Pro, Phase Ultra and the free trial.

  • Speak needs a confirmed email address on your login.

  • The first time, allow Phase to use the microphone.

  • Dropping a pin needs the Notes area in your access, and location access for Phase on your phone. Asking about the paddock you're in needs location access too.

Talk to Agent with Speak

  1. Open Agent.

  2. Select Speak beside the message box. Speak turns into a moving orb, and the message box becomes the call.

  3. Talk the way you normally would. The orb listens, swirls while Phase checks your records, and pulses as the reply is spoken. A two-line caption above it shows what you said or what Agent is saying.

  4. To turn your microphone off without ending the call, select the microphone button. The time on the call shows beside it.

  5. To finish, select the hang-up button (End). The message box comes back.

During the call, the answer area becomes the Speak view. It shows What I heard, and the map, figures or change for what you're talking about. An answer that used a chemical label shows the read-the-label notice there too.

In a web browser the orb moves with the real sound of your voice and the reply. In the iPhone and Android apps it shows listening, checking and speaking by its shape.

What Agent says back

While Agent checks your records, it says a short line about what it's doing, such as "Alright, I'll pull up those yield records". Then it gives the answer in a sentence or two:

  • A yield question gets the yield, crop and variety. A rainfall question gets the amount and the period. A soil question gets the reading, its sample date, depth and method.

  • Hectares, tonnes, sources and the rest stay on screen. Ask if you want more read out.

  • Asked for a chart ("show that as a chart"), Speak introduces it briefly and leaves the readings on screen.

  • A label answer keeps its restrictions and ends with a short reminder to read the label. The full notice is on screen.

  • To correct Agent, start talking. It stops and listens.

Approve a change you asked for out loud

Saying "yes" out loud never approves a change.

  1. Select Review changes for a proposed change, or Review draft for a draft recommendation or activity.

  2. Check the change in the sheet that opens.

  3. Select Approve or Reject. For a draft, select Confirm reco or Confirm activity.

The one exception is a pin dropped where you're standing, which saves straight away and can be undone (see below).

Ask about the paddock you're standing in

Ask "what did this paddock yield last time it was wheat?", "how much rain have we had here?" or "what paddock am I in?", typed or with Speak, without naming the paddock.

  1. Agent says "Right, let me just see where you are." (out loud on a Speak call) and takes your phone's location.

  2. It answers for the paddock you're inside on the map, and starts by naming it ("You're in North 3. …"), so a wrong paddock is obvious straight away.

How it decides what you mean.

  • "Here", "where I am", "where I'm standing", "the paddock I'm in" and "what paddock am I in" always mean where you're standing.

  • "This paddock" typed in the chat means the paddock shown at the top of the chat (Paddock: …), or the one you were just talking about. With neither, it means where you are. On a Speak call it always means where you are.

  • It only uses a paddock you're inside on the map, never the nearest one. Outside every paddock, or with location off, it says so and asks "Which paddock do you mean?"

Questions that name a paddock work as before. The first time, the phone may ask to let Phase use your location. This works on the Agent page, not in Spatial's agent panel or Crop Plan Studio's Agent tab.

Use the microphone button instead

If your login or device doesn't offer Speak, a microphone button sits in its place.

  1. Hold the microphone button while you talk.

  2. Let go when you've finished. Phase turns what you said into text and sends it straight away. Anything you'd already typed in the box is kept in front of it.

  • Misheard names are corrected to your paddock and product names before Agent works on them, for example "creek flap" to a paddock called Creek Flat, "units of end" to units of N, and "john dear" to John Deere.

  • Leaving the page or switching away from the app stops the recording.

  • In Phase Spatial's agent panel, the microphone puts the words in the message box so you can edit them before you send them.

  • Crop Plan Studio's Agent tab is typed only.

Drop a pin where you're standing

  1. Stand on the spot in the paddock.

  2. Say or type something like "There's a massive rock here, can you mark it?", in a Speak call or in the message box. Phase drops a pin at your phone's location straight away, as a Note named in your words ("Massive rock"), in the paddock you're in. The pin shows on the small map under the answer.

  3. Answer Agent's question, "Want me to assign it to someone, or make it a job?":

    • Say "assign it to Bec", or select a button such as Assign to Bec. This makes a job linked to the pin, and Bec gets the usual "New job from…" notification.

    • Say "make it a job", or select Make it a job. The job has nobody on it yet; give it to someone from Jobs.

    • Say "nah all good", or select Leave it. The pin stays on the map.

    • Say "undo that" to take the pin off the map.

What type of Note it becomes. A rock, stump or hole is a hazard with machinery risk ticked. Weeds, fences and gates, water problems such as a burst pipe or leaking trough, and livestock go to their own types. If your farm has its own type with a matching name, such as Rock, that type wins.

Names Phase doesn't know. If you say something like "give it to dad" and that isn't anyone's name, Phase asks who that is once, then remembers it on that phone for that farm.

Limits on Speak

  • Each call stops at 10 minutes. Agent says "10-minute call limit reached". Select Speak again to start a new call.

  • Each person has 30 minutes of speaking a day, which resets at midnight Perth time. When it runs out, Agent says "30-minute daily voice limit reached", and Speak stays greyed out with the reason under it until it's available again.

  • A call ends by itself, and the microphone switches off, as soon as you leave the Agent page, switch to another app or tab, lock the phone or close the app. Changing the conversation, farm or season ends it too.

  • One call at a time. If a call is already open, for example on another device, Phase asks you to end it first.

Good to know

  • A pin, and the job or assignment that follows it, are the only things Agent saves without an on-screen confirm. Everything else still needs Approve or Confirm.

  • Phase waits about 10 minutes for your answer about who gets the pin. After that, the pin stays on the Map and you can follow it up from there.

  • If you're not inside a paddock, the pin goes exactly where you are, without a paddock.

  • The pin's note records that it was dropped with Phase Agent and what you said.

If something doesn't look right

  • "Pin not dropped" because of your access. Your login can't add Notes on this farm. Ask an owner, co-owner or admin to turn on Notes for you under More → Settings → Organisation → Team.

  • "I couldn't get your location". Turn on location access for Phase in your phone's settings and try again. Nothing was saved.

  • Speak won't start. Check that your login's email address has been confirmed, and check the microphone permission for Phase in your browser or phone settings. If it says a voice conversation is already open, end the other call first.

  • You can't hear the reply. If a Play audio button appears, select it. Your browser had blocked the sound.

  • Speak is greyed out. The reason shows under it. Usually you've used today's 30 minutes (type your question, or speak again after midnight Perth time), or another call is still open.

Related

Did this answer your question?