Phase Agent (Agent in the main menu) never changes your records on its own. When you ask it to change a rate, move a pass, mark work done or copy a plan, it shows the change as a before and after, and nothing is written until you select Approve. This article covers approving, rejecting, adjusting and undoing a change, and lists the changes Agent can make.
Phase Agent didn't change your rate? It prepared the change and is waiting for you. Look under the answer for "Waiting for approval" and select Approve. If there's no change to approve, see If something doesn't look right at the end of this article.
Before you start
Phase Agent comes with Phase Pro, Phase Ultra and the free trial. It isn't available on an Advisor Managed farm, but the Agent tab in Crop Plan Studio still works there.
Each change needs the same access as making it by hand:
Rates, products, water rates, dates and copying a plan need permission to edit crop plans (the Crop plans and recommendations area).
Marking work done needs Record completed work.
A draft recommendation needs permission to create recommendations.
Reserving stock needs permission to edit Inventory.
Dropping or changing a pin needs Notes.
An owner, co-owner or admin can change access under More → Settings → Organisation → Team.
Approve or reject a change
Ask for the change in your own words, for example "Raise urea on North 1 to 120 kg/ha". The answer says what's waiting, such as "Ready for review: raise urea on North 1 to 120 kg/ha".
Check the change under the answer. Under the product and pass it belongs to, the value now has a minus and is struck through, the value after has a plus, and the paddocks it covers are listed.
Read the question under it, for example "Apply these 3 changes to 3 records?".
Select Approve to apply it. You'll see "Applying the changes", then "Changes applied" and "Approved by you". Or select Reject. Nothing is written, and the change reads "Rejected, nothing was written".
After a reject, choose Adjust the change to ask Agent for a different change, or Review again to bring Approve back.
If applying fails, the card says "Nothing was written. Try again?" and Approve becomes Try again.
High-impact changes. A large change says "High-impact change: review the complete scope below" before you decide, with the paddocks, hectares, products and any warnings.
Save a draft recommendation or activity
When you ask Agent to create a recommendation or a crop-plan activity, it opens a draft with its own form instead of a before and after. Check the paddock, products, rates and timing, then select Confirm reco or Confirm activity. Phase checks the paddock and products again, then creates the record and its product lines together.
A draft for several paddocks. Ask "Create a spray reco for all the wheat at Banksia Downs" and Agent opens one draft listing the matching paddocks (Paddocks · 4).
Check the products, rates and timing once.
Save each paddock with its own button, such as Confirm North 1. The draft counts them off, for example "2 of 4 paddocks saved", and each saved paddock shows its own result.
Repeat for the other paddocks.
A change to the shared details applies only to paddocks not saved yet.
To change which paddocks are in the draft, ask Agent for a revised draft.
If saving a paddock is interrupted, its button reads Check saved status. Look at that paddock's records before you try again. The other paddocks stay available.
Correct a change before you approve it
Short corrections update the change or draft and keep the rest of it: "actually barley" or "no, at Banksia Downs". If a correction would lose something you said earlier, Agent asks rather than guessing.
Undo a change you approved
In the same conversation, type "undo that change".
Check the reversal. Agent shows it as a new change to approve.
Select Approve.
Agent can reverse the latest approved product-rate, water-rate or date change in that conversation.
It checks the records are still as the change left them. It refuses if the records have changed since, or the pass has been marked done. Nothing is changed when it refuses, and you can fix the plan by hand.
Plan changes Agent can make
Agent prepares each of these as a change to approve. The rules below apply from 15 October 2026. Changes Agent made before then aren't recalculated: for example, a rate it changed earlier isn't re-costed, so open the line and choose Use inventory price, or set the price.
Rates, swaps and added products. Change a product's rate or a water rate, swap one product for another, or add or remove a product in a mix. The plan line is costed again straight away, so Financial Performance, Crop Plan Studio and reports show the new cost per hectare. A plan price you set yourself stays through a rate change. A swapped-in product is priced from your inventory, or left without a price until it has one. It doesn't carry over the old product's plan price, shed or line notes.
Moving passes by days. "Push the sprays on Creek Flat back two days" moves Creek Flat's sprays only. Name a farm ("at Banksia Downs") or a kind of pass ("the fungicide sprays", knockdowns, pre-em or post-em sprays, insecticides, grass sprays) and only those move. A paddock or farm name Agent can't find is refused and nothing moves; it never widens the change to every paddock. Before 15 October 2026, a date shift that named a paddock moved that kind of pass on every paddock.
Marking work done on the day it was done. Say the day: "I sprayed North 1 yesterday", "mark the knockdown done on Tuesday" or "done 12 October". The preview shows the day, and the spray record and the stock taken out carry it. Without a day, it's today. A day still to come is refused, and so is one more than a year back ("Record work that old in the paddock's records instead"). An activity that already has work recorded against it is left out of the list to confirm, and a save that is refused shows the reason.
The area worked. Marking a pass done records the paddock's arable area (the hectares you've said are cropped), not the whole fence line. So the area, the stock taken out and the job's cost match what the preview showed.
Copying a plan. "Copy this plan to North 2 and Back Paddock" copies what Copy plan on the paddock's Plan tab copies, including the low and high grain prices, dryland or irrigated, and undersown pasture seed. If any of them change between the preview and Approve, the copy stops. Ask again for a fresh preview.
Other changes Agent can prepare
Jobs: create or change a farm job.
Stock set aside: reserve stock for paddocks or a crop. This never changes the stock you have on hand.
Recommendations and activities: a draft to check and confirm, as above.
Pins: a pin dropped where you're standing, and the job that follows it, are the only things Agent saves without an on-screen confirm. See Speak to Phase Agent and drop a pin.
Good to know
Saying "yes" out loud in a Speak call never approves a change. Use Review changes or Review draft on screen.
A change shown in a past conversation, or before the page reloaded, can't be approved or confirmed. Ask for it again.
In Crop Plan Studio, the Agent tab works the same way, with its own Proposed change card and an Apply to button that names how many paddocks it changes. See Ask Agent in Crop Plan Studio to change the plan.
If something doesn't look right
There's no Approve button. Agent may have answered a question rather than prepared a change. "Should I raise the urea?" gets advice; "Raise the urea on North 1 to 120 kg/ha" gets a change. Ask again with the paddock, product and new rate.
Agent says "I can't make that change from chat". Chat changes planned rates and products, marks planned work done, and makes jobs, paddock notes and recommendations. For anything else, tap Show me how to do this and Agent says where in Phase it's done. If it says your login doesn't have access, see Before you start.
The card says "Nothing was written. Try again?" The change couldn't be applied, sometimes because the plan changed after the preview. Select Try again, or ask for the change again to get a fresh preview.
Phase Agent isn't in the menu. The farm may be Advisor Managed, or not on Phase Pro, Phase Ultra or a trial. Use Crop Plan Studio, or change the plan by hand: Plan on a computer, More → Paddocks & crops → Crop Plan Studio on a phone, or Map → the paddock → Plan.
Agent still won't make a supported change. Tell us in Help chat with the farm, the paddock, what you typed and a screenshot. The team treats it as a bug.