Skip to main content

Start from last season or copy a plan

Fill this season from last season's program, or copy a plan or a single pass to other paddocks.

P
Written by Phase Team

Use this when this season largely follows one you've already planned or done, or when one paddock's program suits others. Start from last season… fills this season's empty paddocks from an earlier season. Copying puts one paddock's whole plan, or one pass, onto other paddocks. Both are in Crop Plan Studio (the Plan page).

Before you start

  • You need permission to edit crop plans.

  • Open Crop Plan Studio: on a computer select Plan; on a phone select More → Paddocks & crops → Crop Plan Studio.

  • Check the season in the top bar is the season you are planning, not the one you are copying from.

Fill this season from last season

Start from last season… only fills paddocks with nothing planned yet. Paddocks you've already planned, and paddocks marked Not cropped this season, are left exactly as they are, and the panel says how many.

  1. Select Actions in the top bar, then Start from last season…. On an empty season, the Plan your 2027 season card on the map has a Start from last season button too.

  2. If there is more than one earlier season, choose it under Copy from.

  3. Choose what to copy:

    • Copy what was applied (the default) brings each finished pass across with the products and rates you actually recorded. That includes a product swapped when it was marked done or fixed with Edit what was applied, and John Deere jobs that matched no plan. Passes never done keep what was planned.

    • Copy the plan brings every pass across as it was planned, done or not.

  4. For each crop group, choose what the old crop becomes this season, in the list beside the arrow. Untick a group to leave it out. If you've recorded what a paddock is meant to grow this season, that crop is chosen for you ("Meant for Barley in 2027").

  5. Leave Carry program ticked only where the activities should come across too. If the crop changes, the group says "Rotation change" and those paddocks start the new crop with a clean program. Build or apply that program afterwards.

  6. Select Preview changes, check the preview over the map, then select Apply to N paddocks. It all goes in at once, and Undo in the top bar puts it all back.

What comes across:

  • Passes come across as planned work, dated in the new season.

  • Machines and other costs come from the plan and keep their $/ha.

  • Products are priced at today's Inventory prices. A price you set on last year's plan is left behind.

  • Last season's harvest yield, moisture, grade and seed lot don't come across, and neither do the low and high prices or dryland or irrigated.

Carried work is a starting point. Check dates, products, rates, varieties and costs for the new season.

Start one paddock from its last program

  1. Select a paddock with nothing planned this season.

  2. Select the Start from last season card on the planning panel. It names the program, for example "The 2026 Wheat program, 6 passes", and uses that paddock's most recent season with a program.

  3. Check the preview and select Apply to 1 paddock.

Copy one paddock's plan to other paddocks

  1. Select the paddock whose plan you want to copy.

  2. Select Plan tools (the ••• at the top of the paddock sheet), then Copy this plan to other paddocks…. A bar over the map names it, for example "Copy North 1's plan". The paddock sheet stays down so the map is free to tap.

  3. Tap each paddock it should go on, or a crop in the legend. The count shows in the bar. For a paddock with no boundary on the map, select List in the bar and tick it there.

  4. Select Copy to N selected paddocks (on a phone, Copy to N). If none of those paddocks has work planned, the copy is made straight away.

  5. If any of them already have work, a preview opens over the map asking What should happen there?. Choose a card:

    • Add to existing: the copied activities join what is already planned.

    • Replace planned: their planned activities are removed first. Finished work stays.

  6. Select Apply to N paddocks.

A whole-plan copy takes the whole program: passes already done on the source paddock come across as work still to do, and the preview, when it shows, says how many. Cancel in the bar puts the plan down without copying.

Fill an empty paddock from another paddock

  1. Select the empty paddock.

  2. Select the Copy from a paddock card on the planning panel.

  3. Search for the paddock to copy from and select it. Each one shows its crop, variety, number of activities and $/ha.

  4. Check the preview and select Apply to 1 paddock.

Copy one pass to other paddocks

  1. Select a paddock that has the pass, and open the pass.

  2. Select the pass's ••• menu, then Copy this pass to paddocks…. The menu may also offer a shortcut such as Copy to Wheat paddocks missing it · 4. It skips the tapping and goes straight to a preview: select Apply to 4 paddocks.

  3. Tap the paddocks it should go on.

  4. Select Copy to N selected paddocks (on a phone, Copy to N).

The pass keeps its date. A paddock that already has the same pass is left out, so it isn't added twice. When that happens a preview opens first and lists it as skipped: select Apply to N paddocks to copy to the rest.

Copy from a paddock's Plan tab

  1. Open Map, select the source paddock, and open its Plan tab.

  2. For the whole plan, select Plan tools (the ••• at the top of the sheet), then Copy this plan to other paddocks…. For one pass, open the pass's ••• menu and select Copy this pass to paddocks….

  3. Tick the paddocks to copy to (Select all and Clear work on the paddocks your search shows).

  4. Choose what happens where a paddock already has a plan:

    • Keep existing (picked first) leaves its plan as it is.

    • Replace plan swaps its plan for the copied one.

    • Merge activities keeps its plan and adds the copied activities on the end, without checking for duplicates.

For one activity the choices are Skip duplicate, Replace match and Add activity.

  1. Select Apply to N fields.

  2. Check each paddock's status: Applied, Kept or Failed. Retry only the ones that failed.

Copied activities become planned work. Their done status and completed records aren't copied.

Ask Phase Agent to copy a plan

Ask in your own words, for example "Copy last year's canola plan to Creek Flat for 2026" or "Put the same program on Back Paddock". Agent shows what it will copy, and nothing is written until you select Approve. It copies the same things as Copy this plan to other paddocks… on the Plan tab, with the dates moved to the new season. If either plan changes before you approve, Agent stops and asks you to make the request again rather than copying something you didn't see.

What a copy carries

A direct copy keeps the plan dates, activity details, products, machines, rates, cost per hectare, plan-only prices and preferred storage. It also keeps:

  • each cost's kind; a cost charged per tonne keeps its $/t and the product it is charged on

  • whether each pass is committed or conditional, with its condition and review date, so a conditional fungicide doesn't arrive as committed spend

  • what a sowing rate was worked out from (target plants/m², establishment, grain weight, germination and seed lot)

  • the nozzle size, and the diesel figure on machine lines

When a copy creates or replaces a paddock's plan, it also copies the crop, variety, target yield and price, the bad and bumper yields, the low and high prices, and dryland or irrigated. Merge activities keeps the destination's own crop and figures.

Good to know

  • Replace plan on a Plan tab never quietly removes finished work. If a paddock already has passes done this season, Phase lists them (for example "North 1: Knockdown (done 3 May)") and asks first. By default the finished passes stay with their spray and seeding records, and only the passes still to do are swapped.

  • Also delete the finished passes, ticked in that question, deletes them and their records and puts the stock they used back into Inventory. This can't be undone. It is only offered to people who can edit Inventory. Work recorded from John Deere is undone from Reconcile instead.

  • Replace planned in Crop Plan Studio, including when applying a template, always keeps finished work.

  • Re-importing a crop plan with Replace existing plans asks the same way, and never picks it for you when a paddock has finished work.

  • Replace planned with another crop's program makes the paddock that crop, and the preview says so.

If something doesn't look right

  • Every pass is doubled after copying. Add to existing and Merge activities add every copied pass alongside what was there. Remove the extras with the pass's ••• → Remove from N paddocks (in the Studio or on the Plan tab). Or clear the plan (Plan tools → Clear this paddock's plan…) and copy again with Replace planned. Deleting needs permission to edit plans. If a pass won't delete, contact Phase support.

  • Copy this plan to other paddocks… is greyed out. Select a paddock with activities, and only paddocks of one crop.

  • Start from last season says there's nothing to bring forward. Every paddock already has a program, or no unplanned paddock had a crop in that season. Paddocks with no crop on record then aren't listed.

  • Carry program is greyed out. The crop is changing for that group, so its program doesn't follow.

  • Last year's prices didn't come across. That's deliberate: products use today's Inventory prices. See Prices, costs and gross margin in the crop plan.

Related

Did this answer your question?