When a finished job was recorded wrongly, there are two ways to correct it. Edit what was applied fixes the products, rates, units, totals, area and stock on the record without recording it again. Reopen takes the job back to planned so you can mark it done again; it is also the only way to change the date the work was done.
The plan and the record are separate. A finished job has its own record of what was applied, and changing or deleting a product on the plan doesn't change it. That is why a product deleted from the plan can still show on a finished job: fix the record itself.
You want to | Use |
Change a product, rate, unit, total or area on a finished job | Edit what was applied |
Change the date the work was done | Reopen, then Mark done with the right Date |
Record the job again after changing the plan's rates | Reopen, then Mark done |
Take back a job confirmed from John Deere | Undo confirm in Reconcile |
Move the planned date of a job not yet done | When on the open pass, then Save changes |
Before you start
Editing what was applied, and reopening, both need permission to edit crop plans.
Changing what came off stock, or putting stock back, also needs permission to edit inventory.
Fix what was applied on a finished job
Use this for a finished spray, spread or seeding record with a wrong product, rate, unit or amount, such as a granular recorded as 0.5 L/ha that should read 100 kg/ha.
Open Map, tap the paddock, then tap Plan.
Open the finished pass and make sure Actual is picked on its Actual | Plan switch. It shows what was applied, labelled Phase Actual (or the source it came from).
Open the pass's ••• menu and select Edit what was applied. The window opens with Area done at the top and each product below.
Make your changes (see below).
Read the line under Added to the record's notes: it is what will be recorded as changed.
Select Save changes (or Save 2 changes and so on).
For each product you can:
Swap it for another product in your inventory, or link a product that came in by name only. Select Change product (or Choose product when the line says Not linked to a product in your inventory).
Change the rate and the unit. The Total follows the rate over the area worked, or type the total instead. If the unit doesn't match how the product is stocked, Phase says so, for example "Ammonium Sulphate is stocked in kg, but this says L/ha", and offers a one-tap Use kg/ha.
Take it off stock. Change the amount and the stock movement changes with it. Swap the product and the old one goes back on stock while the new one comes off. Untick it and the stock goes back.
A changed product shows Changed, with the old and new rate, cost and stock use under it. The cost on the record is worked out again from your plan or stock price. Machine cost lines are not changed here.
You can also start from Inventory. Open the product, tap the pencil on the Used movement that came from the job, and select Edit what was applied in the note.
Change the area. Change Area done when a patch or a strip was recorded as the whole paddock. Each product's rate stays and its total is worked out again, the stock taken off follows, and machine and paddock costs are totalled again at their $/ha. The record notes it, for example "area 337 → 30 ha".
What gets written on the record
Spray records are compliance records, so nothing is changed quietly. Every save adds a line saying who changed what and when, for example "Corrected 1 Oct 2026, 14:05 by Bec Harris — Ammonium Sulphate: rate 0.5 L/ha → 100 kg/ha".
The line shows before you save, under Added to the record's notes. It prints on the spray record under Record changes, apart from the job's own notes.
Seed from two silos. Seed that came out of two silos is two stock movements on the job, one per silo. The editor keeps them together: a higher amount comes off the second silo, a lower one goes back into the second silo first, and taking the product off stock puts both back.
Fix a job confirmed from John Deere
Jobs confirmed from John Deere can be corrected with Edit what was applied too. A John Deere refresh won't undo your change. Undo confirm in Reconcile removes the whole record, your changes included.
When you swap the product on a John Deere job, the editor offers Next time John Deere sends "…", use …, ticked. It says what happens otherwise and how many jobs waiting in Reconcile switch too.
Keep it ticked and every waiting job, and every new one, with that John Deere name comes in as the product you chose. A reviewer can still pick something else on a job.
Untick it for a one-off change.
Reopen a finished job
Reopen takes a finished job back to planned so it can be recorded again. Use it after changing the plan's rates, or to change the date the work was done.
It asks first, because it removes the record of what was applied, including any changes made with Edit what was applied, and puts any stock the job used back into inventory. Notes on the job stay.
On a paddock:
Open Map, tap the paddock, then tap Plan.
Open the finished pass and select Reopen at its foot.
Read the question, for example "Reopen Pre-seeding knockdown?", and select Reopen.
In Crop Plan Studio:
Select the paddocks.
Open Completed · N passes under the activity list.
Select Reopen on the pass.
Confirm with Reopen. A pass finished on several paddocks reopens on all of them together, and the question says how many paddocks.
When you mark it done again, Phase records the plan's rates as they are then and takes that amount from stock. Check the amounts on What went on and the day before you select Mark done.
Change the date the work was done
No screen edits the done date in place: When on a pass still to do only moves the planned date, and Edit what was applied changes the area and products only.
Reopen the job: Reopen on the pass on the paddock's Plan tab, or Reopen under Completed · N passes in the Studio.
Select Mark done on the activity.
Set the day the work was done on When it was done.
Check the amounts, then select Mark done on the check.
The new Date is what shows as "Done …" everywhere, including the withholding and plant-back checks and reports. A job recorded from John Deere uses Undo confirm in Reconcile instead.
Good to know
Marking a job done again without reopening it only adds products that were not recorded before. A product recorded before it was in your inventory is recognised as the same product, and is not recorded or taken off stock a second time.
A job recorded from John Deere can't be reopened from the plan. Phase says "This job was recorded from John Deere. Use Undo confirm on it in Reconcile". Undo confirm removes the record and its stock use and puts the job back in the queue: see Confirm, undo or ignore a John Deere job.
In the Studio, Completed · N passes is for reopening only. Edit a record's details from the paddock's Plan tab.
Don't delete a finished activity to fix it: deleting it also deletes its record of what was applied and puts its stock back. Use Edit what was applied, or reopen the job.
If something doesn't look right
A product shows twice on a finished pass, or I deleted it from the plan and it still shows. The plan and the record are separate. Open the finished activity with Actual picked and use Edit what was applied to fix the amount and Take it off stock. Or reopen the job and mark it done again. If stock came off twice, or the line still won't change, contact Phase support with the paddock and the activity.
I reopened the job, fixed the rates, and the record still shows the old rate. Mark it done again after changing the rates, and check Actual quantities used on the form. To correct a finished job without reopening, use Edit what was applied. If the record still doesn't change, contact Phase support.
"Could not reopen this job". Nothing was changed. Check your connection, and check you can edit crop plans and inventory, then try again.
"Changing what came off stock needs permission to edit inventory". Leave Take it off stock as it was, or ask the farm owner for inventory access.
I can't see Edit what was applied. It is in the finished pass's ••• menu, with Actual picked on its Actual | Plan switch. On the Plan tab it only shows for people who can edit crop plans; opened from Inventory without that permission, the window is read-only. A job with no products recorded has nothing to edit.