Phase costs your crop plans, Demand and stock value from the prices in Inventory. Use this to see where a product's price comes from, give a product a price before you've bought any, change many prices at once, or put a price back. The quickest way to price lots of products is Inventory → Actions → Edit prices: one grid, no need to open each product or each plan activity.
Before you start
Changing prices needs permission to change Inventory. Prices in Phase are ex GST.
Where a product's price comes from
Each stock lot keeps the price it was bought at, per the unit the lot is counted in. Under Stock lots on the product it shows as, for example, Bought at $7.80/L, including prices read from an invoice. Setting a price never changes what a delivery cost.
Wherever Phase needs a unit price (crop plan lines, the Inputs panel in Crop Plan Studio, Demand), it works it out like this:
A price you set wins from that day. When you type a price in Edit prices, or a new List price on the product, Phase uses it ahead of stock you received before it.
New stock takes over again. When a delivery arrives after you set a price, that delivery's price is used. An old invoice entered late, dated before you set the price, doesn't change it.
Otherwise it's your stock. Phase uses the average price of what's on hand, or the price of the last lot you bought once it's all used.
Then the list price. A list price that's been on a product unchanged is only used when there's no priced stock.
Nothing at all stays blank, rather than reading $0.
The price on each product row shows the $/unit and the value of stock on hand, for example "$8.40/L · $2,520". It says "list" when it comes from the list price. On a computer, hover over it to see where the price came from.
Give a product a price before you buy it
A List price is what you expect to pay, so a product planned for next season has a cost before any is in the shed. Every product starts with it blank.
Open the product in Inventory.
Select Edit.
Under Storage & ordering, type the List price and choose Price per (for example L, kg or t).
Select Save changes.
When adding a new product, these fields are under More details. Once saved, the product's Product details show Price set with the price and date, for example "$8.40/L on 11 Oct 2026".
Change many prices at once with Edit prices
Open Inventory and the section: Chemicals, Fertiliser, Seed, Livestock or Parts & other.
Select Actions (••• on a phone) → Edit prices. A grid lists every product in the section, one row each, with the price Phase is costing it at.
Click a price and type the new one. Enter moves down to the next product. You can also paste a column of prices copied from a spreadsheet, or drag the corner of a cell to fill the same price down. On a phone, tap a price to select it, then tap again to type.
Check Per: the unit the price is for (L or kL, kg or t). Changing Per on a price you haven't touched converts it, so $0.85 per kg becomes $850 per t.
Select Save or Save and update plans (see below).
The grid's columns are Product, Price, Per, Changed, Price from, On hand and Type. Price from says where each price comes from: Stock received, Last delivery, List price, No price yet, or Set 11 Oct 2026 once you've set one. A row you've changed says Changed, and the bar at the bottom counts them, with Discard to start again. Undo, Redo, search, sort, Filter and Export are at the top of the grid.
The two ways to save:
Save changes the price in Inventory only. Plan lines that follow Inventory then show Inventory price is now $X, with a button to use the new price or keep the old one.
Save and update plans also puts the new price on your crop plans: every activity not yet marked done, in the season showing at the top of the screen and later seasons. It tells you how many plan lines will change before anything is saved. Work already done keeps the cost on its record.
Prices typed on a plan are kept unless you say so. If some of those plan lines have a price typed on them in Map → Plan or Crop Plan Studio, the confirm step counts them separately and asks with a tick box, such as Also replace the 3 prices typed on plans. Leave it unticked and those lines keep the price you typed. Tick it and they take the new price and follow Inventory from then on.
Crop Plan Studio has the same grid under Actions → Edit prices…. See Prices, costs and gross margin in the crop plan.
When Phase questions a price
Phase checks a price before saving it:
In Edit prices, a price that looks like a per-tonne figure typed per kg (urea at $920 per kg) opens Check this price. Select Go back and change Per to t, or Save anyway.
In Add stock, Edit lot and the opening stock on Add product, the cost box is per the lot's unit, for example Cost per kg ex GST ($). A price that looks per tonne, judged at the rate the product is used at, is questioned with three answers, for example Record in tonnes at $825.00/t, Use $0.825/kg or Keep $825.00/kg. With no usual rate known, only a fertiliser at $100/kg or more is questioned.
In Import stock levels and Upload invoice, the same question is asked for each row before import. On an invoice the price is the line total divided by the quantity, so the fix offered is Record in tonnes.
This matters because plans that follow Inventory take their price from these lots, so a slip would reach every paddock. Phase also never moves a plan line to a price that would put it over $1,000 a hectare, won't let a granule be priced per litre, and won't let a price that comes only from stock be left blank.
See price history or put a price back
Every price you set is kept on the product.
Open the product in Inventory and find Price history. Each line shows the old and new price (for example "$7.80/L to $8.40/L"), the date, how it was changed, where the old price came from, and how many plan lines were updated.
On the newest change, select Revert this change.
Read the message and select Revert, or Keep it to leave it.
Revert puts the product back to the price it had, and puts every plan line that change moved back to what it said before, including prices that had been typed on a plan. A plan line changed again since, or whose work is now done, is left as it is, and the message says how many. Deliveries are not touched. The revert is added to the history as its own line.
Good to know
Only the newest change can be reverted. Older ones are there to read.
Phase keeps the last 12 price changes for each product. History starts from the first price set after 11 October 2026.
Demand shows each product's estimated cost but you can't type prices there. Use a List price or Edit prices.
The Add part or fluid form has no List price. Price parts and fluids in Edit prices in Parts & other.
If something doesn't look right
A plan line didn't take the new price. It had a price typed on it and the tick box was left clear, its work is done, or the new price would put it over $1,000 a hectare.
The price is blank. The product has no priced stock and no list price. Give it a List price.
A price looks 1,000 times too high. It's probably a per-tonne price saved per kg. Change Per to t, or use Record in tonnes when Phase asks.
I can't clear a price in Edit prices. It comes from stock received. Type the price to use from now on instead.