Skip to main content

Check the lines on an imported invoice

Check what Phase read from an invoice: matched products, GST, dates, pack sizes, credits and product details.

P
Written by Phase Team

After you upload a supplier invoice in Inventory → Actions → Upload invoice, Phase opens one screen, Check and match, with its copy of the invoice beside every line it read. Use this article to check those lines against the page and fix a wrong match before you import.

The most common problem. An invoice made a second copy of a product instead of adding stock to the one on your crop plan. Before importing, check Goes into stock as on every line. If it has already happened, join the two with Merge products (see "Fix a wrong product match" below).

Check each line against the page

For a PDF or photo up to 3 MB, Phase's copy of the invoice page sits on the left of Check and match and the lines on the right. On a phone the page is behind Show the invoice, above the lines. The lines open as soon as the invoice is read; the page joins them a moment later.

  1. Rest on a line, or work in it, and the place the page prints it is outlined. Point at something on the page and its line is outlined; press it to go to that line.

  2. Check the Supplier, Invoice no. and Invoice date at the top, once for the whole invoice. A value the page doesn't print as read says "Not found on the page".

  3. Read what each line says under its name. "Amount not found on the page" (or the quantity, unit or description) means Phase couldn't find that value printed. "Not on the page copy" means the line isn't on the pages Phase copied, and "Phase was unsure of this line" asks for a closer look.

  4. Fix anything wrong right on the line.

  • The page shown is Phase's copy of the invoice, redrawn by Phase, not the file itself. If something looks odd, check your original.

  • A long invoice shows its first 8 pages. Lines from later pages have nothing to point at.

  • A CSV, a file over 3 MB, or an invoice Phase couldn't copy shows the lines without the page. On a trial, the page copy doesn't count as another invoice.

What each line shows

Every line is open, so the whole invoice reads top to bottom without opening anything:

  • Use / Skip, what the invoice says (its name, quantity, unit and part number) and the amount, marked Inc GST, Ex GST or GST not stated.

  • Goes into stock as: the product the line adds stock to, or New product.

  • Quantity and Unit.

  • Goes to: the storage location, with the reason it was filled in, such as "Where its stock is" or "Where these are usually kept".

  • What still needs checking, if anything.

  • Price, date and product details, folded: the line total and its GST, the unit price, the Invoice date, the category and the product's own details.

Check what each line goes into stock as

Goes into stock as on each line is the product the line adds stock to. It is a searchable list.

  1. Select Goes into stock as on the line.

  2. Type part of the product's name, a part number (old and other numbers too), another name it goes by, its brand or an active.

  3. Choose the product, or choose New product. To make a new product with the name you typed, choose New product called "…" under the matches.

Seed by its variety. A seed line goes to the seed already in your Inventory with the same variety and crop, even when the invoice words it differently, and shows Same seed variety. When two of your seed products are the same variety, Phase leaves the line for you to choose.

Each product in the list shows how much is on hand and whether it is on a crop plan. Matching ignores capital letters, and Phase prefers the crop-plan wording when the invoice spells a product differently. Under the box, Phase shows how sure it was and why (such as "AI confidence 92%"), or Chosen by you once you pick one yourself.

A new product gets a New product name box and a Category right on the line. If the name matches a line on your crop plan, Phase says it will link the new product to that plan line.

What needs checking

Each line says in words what is left to do. A line counts under the Ready tab once nothing on it holds the import back, a new product included; notes worth a look still show on the line. A line stays on Needs a look while you fix it.

These hold the import back until they are sorted: Unit needed, Location needed, GST basis needed, Price looks off, Part number in use, Name needed, Quantity needed and Line total needed.

These are worth a look but don't stop the import: Check the match, Check new product, No match chosen (the line saves as a new product unless you choose one) and a count of notes to read, shown under Price, date and product details.

GST on lines that don't say

Some invoices, such as many machinery dealers' parts invoices, don't say whether their line totals include GST. Each of those lines shows GST basis needed, and its Unit price has no Inc or Ex GST beside it until you answer.

  • Several lines at once. When two or more selected lines are waiting, the top of the list says how many and offers Inc GST and Ex GST once for all of them. Lines Phase already read, and skipped lines, keep theirs.

  • One line. Choose Inc GST or Ex GST under Line total is on the line, or beside Line total in Price, date and product details, even after setting them all.

  • Every line. The GST on every line switch beside the Import button sets every line at once, including the ones Phase read.

Phase always saves inventory cost ex GST.

Dates, packs, units and credits

  • Invoice date. Dates are read day first, the Australian way, so 04/03/2026 is 4 March. Fix a wrong or missing date once at the top of the screen, or on one line under Price, date and product details. With no date read, the top says "No invoice date read, so it saves as today".

  • Stock already imported with the day and month swapped keeps that date. To fix it, open the product in Inventory, select the pencil (Edit lot) beside that stock lot, and change its Purchase date.

  • Pack sizes. A strength on the line ("250 g/L") is not taken for the pack size, and "4 x 5L" is a 20 L pack. Check the quantity and unit on every line anyway.

  • Parts with no unit. When a parts invoice prints no unit, as many machinery dealers' invoices do, each part comes through with its name, part number and quantity, counted each. The line says "No unit was printed, so this part is counted each."

  • Tonnes and litres. Lines written in T, MT or TNE read as tonnes, and LT or LTR as litres.

  • A unit the product can't use. A line in kilograms matched to a product kept in litres (or similar) says so under its price and asks you to change the unit or the match. It doesn't stop the import. Kilograms against tonnes converts without a word.

  • Price looks off. A price per kg that looks like a per-tonne price holds the line back. Choose Record in tonnes at … (the button names the price) to change the unit, or Keep … to leave it.

  • Credits and returns show as Credit lines set to Skip. They never add stock. If goods went back, take them off by hand with Use / adjust.

  • Totals. When the lines don't add up to the invoice's printed total, the first review note gives both amounts: a line may be missing or misread. Statements aren't checked this way.

  • Long invoices. An invoice of about 45 lines or more may not read in one go. Split it into files of a page or two and import them one at a time.

Product details on each line

Open Price, date and product details on a line to check the same fields you would fill in when adding that kind of product by hand:

  • Part or fluid (a filter, hose, belt, oil or AdBlue): Brand / manufacturer, Part number, Kind of part, Preferred supplier and Fits these machines. Phase reads the part number or item code off the invoice and fills in the invoice's supplier as the preferred supplier.

  • Chemical: Brand / manufacturer, Formulation, APVMA number, Chemical groups (HRAC / FRAC / IRAC) and the actives.

  • Fertiliser: Brand / manufacturer, Formulation and its Nutrient analysis (%).

  • Seed and grain: Brand / breeder, Formulation, Crop type and Variety / cultivar (seed) or Variety / grade (grain).

Parts matched by part number. A line whose part number matches a part you already have is matched to that part, even when the invoice names it differently ("Filter element, engine oil" finds your "Engine oil filter"). That includes a part's Other numbers for this part, so a filter bought from a different dealer under its other number joins the same part.

What a matched line saves. What the product already records stays, blanks are filled from the invoice, and the category follows the product.

Part number in use. If a new line carries a part number another part already has, it shows Part number in use and offers Match to that part instead of making a second one.

Which section a line goes to. A line Phase can't place starts as the kind of product of the section you uploaded from (Chemicals, Fertiliser, Seed or Parts & other). Other lines keep their own kind.

Other chemicals and animal health. Miticides, nematicides, molluscicides and seed treatments import like any other chemical; a herbicide whose name Phase doesn't recognise stays a herbicide, with its actives. Vaccines, drenches and ear tags import into Livestock as Animal health or Livestock supplies.

Fix a wrong product match

Before importing, open Goes into stock as on the line and choose the product that is on your crop plan or already has stock (the list shows both). If it isn't in your Inventory yet, choose New product and check its name in New product name. Don't import with a temporary or wrong name: it makes stock, demand and reports harder to clean up.

After importing, if a duplicate was made:

  1. Open Inventory and the product's section, then select Actions → Merge products.

  2. Keep the product that is on the crop plan or has stock, and merge the invoice-made copy into it. The copy's stock, plans and history move onto the product you keep, and the copy is deleted.

  3. If the plan line was only typed text and never a product, Merge lists that match and offers Link to crop plan.

Don't try to move the stock across in Movements (the view under a section's heading): it can't join two products. See Find, merge or delete a product for merging, and undoing a merge.

Related

Did this answer your question?