Skip to main content

Parts, fluids and specs for each machine

Record which parts fit each machine, their other part numbers, and the oils, pressures and specs the crew needs.

P
Written by Phase Team

Record which filters, belts and fluids fit each machine, the other part numbers a part goes by at other dealers, and the oils, tyre pressures and grease points the crew needs to know. Then anyone can find the right part for a machine, or read its specs off the machine's Phase tag in the shed.

Before you start

  • Adding and editing parts and fluids needs permission to edit Inventory.

  • Writing a machine's specs and engine number needs permission to edit the farm, like the rest of the machine's details. Owners, co-owners and admins always have both; staff have them unless they were turned off.

  • Add your machines first. See Add and organise machines and tools.

One list of parts and fluids

Filters, belts, oil, coolant, AdBlue and diesel are one list. It shows in two places:

  • Inventory → Parts & other

  • Machinery → Parts, grouped into Parts and Fluids. Its Inventory button opens Inventory → Parts & other.

A part or fluid added in either place shows in both. Filters and belts are parts; diesel, oil, coolant and AdBlue are fluids.

Add a part or fluid and say which machines it fits

  1. Open Machinery → Parts and select Add part or fluid, or open Inventory → Parts & other and select Add item. (New work → Add a part or fluid opens the same form.)

  2. Under Type, choose Part or Fluid, and type the Name.

  3. Under Workshop details, add the Part number and the Stock unit. Add a Minimum level and Refill-soon level if you want Phase to warn you when it runs low.

  4. Under Fits these machines, tap each machine the part fits. Once the farm has more than eight machines this has a search box; machines already ticked stay in view whatever you type.

  5. Optional: type what is already in the shed under Stock on hand and where it is stored.

  6. Save the part.

A part that fits several machines is still one part with one stock count. It shows for every machine you ticked.

Bought a lot on one invoice? On the form, Add from an invoice opens the invoice upload in Inventory → Parts & other, so Phase reads every part, part number and price off it. See Import a supplier invoice or statement.

Give a part its other numbers

A filter can go by a different number at each dealer. A part keeps one Part number, and can hold up to twelve others.

  1. Open the part and edit it.

  2. Under Workshop details → Other numbers for this part, select Add a number.

  3. Type the brand, then that brand's number. Use Add another number for more.

  4. Save the part.

It stays one part with one stock count. The other numbers then:

  • show beside the part in Machinery → Parts, on a machine's Parts tab and when picking a part for a job, and on the part's detail in Inventory as Other numbers

  • find the part when you search for any of the numbers, or for one of the brands

  • match an invoice that lists the part under another number to the same part, instead of adding a second one

  • appear in the parts spreadsheets, in an Other part numbers column

A part added twice, once under each number, is still two parts. Join them with Actions → Merge products, then add the second number to the one that is left. See Find, merge or delete a product.

Find the parts that fit one machine

In Inventory. Open Inventory → Parts & other and choose Filter, to the right of the search box. Under Machine, pick a machine to show only the parts and fluids that fit it, with what is on hand and the part numbers. Not linked to a machine finds parts nobody has ticked a machine for yet. Location (once you have storage locations) filters by shed, tank or store. Each filter shows as a chip under the search box with how many items match; tap its × to clear it. For a printed workshop list, use Actions → Export.

In Machinery. On Parts, Show a machine first puts one machine's parts at the top of the list.

On the machine. Open the machine and tap Parts. Parts that fit this machine lists them with their part numbers, and Parts and fluids used shows what went on it in past services. Each fitting part has Add to list, which puts it on the farm's Town list for someone to pick up or order. See Use Lists: the town list, spares and what's on order.

On a job. When you add parts to a service or repair job, the parts marked for that machine sit at the top, and the rest of Inventory is still below.

A product's panel in Inventory also has Add to list, beside Edit. It makes the Town list if there isn't one.

Record oils, tyre pressures and specs on a machine

Every machine, implement and tool has a Fluids, pressures & specs section for what the crew always needs to know: which oil, what the tyres run at, where to grease.

  1. Open the machine and tap Details. The section is at the top.

  2. Select Add (or Edit) on the section. More → Edit on the machine opens the same form.

  3. Tap a chip for a usual row, such as Engine oil, Hydraulic oil, Coolant, Grease, Tyre pressure front, Tyre pressure rear, Air filter or AdBlue. Implements, seeders, spreaders and trailers get grease, hydraulic oil, tyre pressures and Wheel bearings instead, and trucks, utes, pumps, stationary plant and tools have their own short lists.

  4. Or select Add a spec and type your own label.

  5. Type the value, for example "15W-40, 28 L", "22 psi" or "Every 50 hrs: feederhouse".

  6. Select Save asset.

A machine can hold up to 24 specs. A machine without any shows a short prompt to add them, or "No oils, pressures or specs recorded for this machine yet." The machine's Notes box is unchanged and still saves.

Where the crew sees them. At the top of the machine's Details tab, and on the machine's Phase tag in a block of their own above Needs attention. The tag also shows the machine's notes and opens any manual filed under its Documents tab. See Put Phase tags on sheds, silos, tanks and machines.

Where else they appear. Machine search finds a spec ("15W-40" lists every machine on it). The printed machine report and the machines export carry the rows, and Phase Agent can answer "What oil does the header take?" from them.

Add the engine number

Engine number sits straight after Serial when you add or edit a machine. It is optional. Once filled in, it shows on the Details tab ("Not added" until then), the printed machine report, the exports, the scanned Phase tag and the service reminder email, so the number the parts counter asks for is always there.

Machine search finds it, and a service invoice that quotes the engine number is matched to the right machine.

Good to know

  • Part and fluid quantities take decimals: type 4.1 L of oil as 4.1, or 4,1. The unit shows beside the box.

  • In Machinery → Parts, leaving Count blank doesn't set stock to zero.

  • Editing a part or fluid in Machinery → Parts keeps the label and safety data sheet links, formulation and default rate set in Inventory.

  • Ticking a machine under Fits these machines doesn't stop you deleting a part later. A part is held by its history instead, such as a service it was used on.

If something doesn't look right

  • A part doesn't show on a machine's Parts tab. Open the part and tick that machine under Fits these machines.

  • The same filter is in twice. Merge them with Actions → Merge products, then add the second number under Other numbers for this part.

  • Phase won't let me delete a part. The message names what holds it, such as a job or a service reminder. See Find, merge or delete a product.

  • There's no Add or Edit button on Fluids, pressures & specs. Writing specs needs permission to edit the farm.

Related

Did this answer your question?