Record each truck or chaser-bin load at harvest, into a silo, shed or bag on the farm, or straight off the paddock to a receival site or buyer. Hay off the baler and silage off the chopper are logged the same way. A new load opens as one card at the foot of the screen that asks one question at a time, and everything the load needs is in that card.
Grain went straight from the header to the receival site, with no silo? Start a Load in, choose Harvest and the paddock, then on Where it went choose Delivered. The load counts towards the paddock's harvest and any contract, and silo stock doesn't change. No structure is needed.
Grain held at a bulk handler. Phase has no storage type for grain warehoused off the farm. Log each truck to the site as Delivered, or as a Load out from a silo. CBH deliveries can come in on their own through More → Daily work → Work reconcile → CBH LoadNet (see Connect CBH LoadNet). Other handlers are not connected, but you can bring in all their loads at once from their delivery summary or dockets with Import loads (see Loads in Yield Centre).
Before you start
Logging loads needs permission to edit Inventory; without it Record load is greyed out. A load into storage needs the silo, shed or bag in Phase, or you can add one as you go (see below).
Where to start a load
More → Paddocks & crops → Yield Centre → Record load, at the top of every tab. It asks Which way did it go?: Off a paddock (a harvest load), Out of storage, Bought in, Between your structures, Traded at the receival site (a transfer at CBH) or A truck still to come (a truck run). Scan a silo's tag opens that silo with its own Load in and Load out. Under A whole harvest at once?, Import loads brings in every load from a handler's or buyer's file (see Loads in Yield Centre).
Inventory → Grain & Hay → Load in or Load out, or Load in on a structure or its Phase tag.
Map → the paddock → Plan → the harvest pass → Log a load, with the paddock and season filled in. On a Bale or Chop for silage step it opens on hay or silage.
A planned truck run → Log the load. This opens the full form at Check and save, filled in from the run (see Plan truck runs).
Log a load, one question at a time
Each step's Next says where it goes ("Where to", "How much", "Check"), and the arrow at the top left goes back. What you have filled in is kept as you move between steps.
Got a docket? Tap Take a photo to photograph the docket, weighbridge ticket or weighbridge display, or Photo or PDF to choose a file. Phase reads it and jumps to the check (see below). Or tap Skip at the top to answer the questions.
Where it came from: under What it is, choose Grain, Seed, Hay or Silage. Under From, choose Harvest (Baled on farm for hay, Chopped on farm for silage) and tap the paddock under Off the paddock; its plan fills in the crop and variety. Or choose Bought in and tap or type the Supplier.
Where it went: choose Into storage and tap the silo, shed or bag under Into (each says what is in it), or Delivered and tap or type the site or buyer under Delivered to, then the contract it counts toward (see below).
What it is: check the crop, Variety and Grade. Each is a button to tap, with Another crop, New variety and Another grade for one not on the list. Check the Harvest it belongs to.
How much: type the Tonnes or use − and +. For hay, the Bales, Bale type and weight Each, kg. Add Moisture if you have it. A delivered load asks Weighed or Estimate under Tonnes on this load. Set the Day on the strip of days, or Pick from a calendar for any earlier day.
Truck and docket (all optional): tap the Truck and Driver (see below) and type the Docket no. A delivered load also has Dockets and receipts to attach the docket, and on an estimate Delivered tonnes (net) for the weighbridge figure. More details holds the docket's quality figures for the crop and a note.
Check: the ticket sums up the load. Anything still missing is listed under "Before it can be saved". Select Save load, or Log another, which keeps where it came from and went for the next truck.
The weighbridge figures. Under the tonnes, On the weighbridge (optional) takes the truck's Gross, Tare and Net. Type any two off the ticket and the third is worked out; the net becomes the tonnes. A figure in kilograms is caught. Hay counted in bales has no truck weights.
Trucks and drivers to tap. Truck lists the farm's trucks from Machinery with their rego, then any truck typed on an earlier run or load. Driver lists the farm's team, then any driver or carter typed before. Another truck and Another driver add someone new, and they are offered from then on.
A load off more than one paddock
On Where it came from, tap More than one paddock, then tap every paddock the truck came off.
On How much, type the load's tonnes, then the tonnes off each paddock but one. The last paddock takes the rest. Split evenly and By paddock size fill the lines for you (by size gives each paddock the same t/ha).
The card won't move on until the tonnes add up. Each paddock's harvest counts only its share, and the load reads, for example, "Split: North 12 t · South 8 t". Just one paddock goes back to an ordinary load. To split a load already logged, open it on Yield Centre → Loads and select Edit load. Bought-in loads and loads out of storage aren't split.
Put a delivered load on a contract
On Where it went, Contract it counts toward lists each open contract with what is still to deliver on it, the load's crop first, and a search box once there are more than eight. When the load clearly matches one, Looks like … : count it towards that puts it on in one tap. New contract… (for people who can record a sale) opens the contract form over the card with the load's crop, grade and buyer filled in, and picks the new contract once it is saved.
To put one truck on several contracts, tap Split it across contracts, then each contract, the one to fill first first. On How much, Phase fills the first contract to what is still owed and puts the rest on the next; type over any figure. It says how much is on no contract, and warns when a contract would be filled past what's left on it. Just one contract undoes the split.
Add a new silo, shed or stack as you go
On Where it went → Into storage, tap A new silo, shed or stack. Give it a name, say what it is and how much it holds. More details has gas-tight (sealed) and aeration for a silo or bin, tonnes or bales, notes, and its spot on the map (Use my location or Drop a pin). Tap Add and the load goes straight into it.
Read the figures off the docket
On Got a docket?, tap Take a photo, or Photo or PDF to choose a file.
Wait while Phase reads it. It fills in what the paper says and nothing more: the tonnes, crop, variety and grade, the quality figures, the truck, the docket number and the docket's date.
On the check, a line says what was read. Check every figure, then select Save load.
The load keeps the docket's own date, so a docket from last week saves under that day and its harvest, not today. The photo or PDF is kept as the load's docket in Documents. Record delivered weight starts with Read it off the weighbridge docket, and a truck run's Log the load has Read it off the docket at the top of Check and save.
Docket quality follows the crop. Wheat asks for protein, screenings, test weight and falling number; barley for protein, screenings, retention and test weight; canola for oil and admixture; oats for screenings and test weight; lupins, field peas, faba beans, chickpeas and lentils for screenings and defective. Any other grain or seed asks for protein, screenings and test weight. Hay and silage ask for none, so their note stays on Truck and docket. A figure saved on an older load still shows when the load is edited.
A docket logged twice. If the docket number is already logged, Phase says which load it is on before saving. Log it again saves it anyway; Go back lets you check.
Log hay or silage off the paddock
On a paddock's Plan tab, a harvest can be a step on the way to hay or silage: Mow or cut, Rake, Bale or Chop for silage, as well as Harvest (header).
Open Map → the paddock → Plan, and find the Bale or Chop for silage step.
Select Log a load. Load in opens with the paddock picked, on Hay (Baled on farm) or Silage (Chopped on farm). If the farm has one hay shed or one silage bunker, it is chosen for you.
On How much, type the Bales and check the Bale type and weight; for silage, type the wet Tonnes.
On the check, select Save load.
Mow or cut and Rake steps have no Log a load and no yield. The paddock counts as harvested once, when it is baled, chopped or harvested by the header. A truck of hay from a supplier is Bought in, so it is logged as a purchase, not as baled on farm.
Which harvest a load goes to
A load off a paddock goes to the harvest its date and that paddock's crop say, not the season Phase is set to or a CBH docket's "Season". Harvest shows why, and Phase warns if you pick a harvest the date can't be in, with Use 2026 harvest and Keep 2027. See Loads in Yield Centre.
Find a structure or paddock in a long list
On a business with more than one farm, silos, sheds, stacks and paddocks are listed under each farm's name, with any not on a farm last (paddocks under Other paddocks). A long paddock list has Find a paddock. Into lists the structures that hold that kind of grain, seed, hay or silage, with Show all for the rest.
If the site turns a load away
Use this for a load still waiting for its weigh-off, rather than deleting it, so its record and dockets stay.
Tap Turned away beside Weigh-off on the Loads awaiting weigh-off card, or Load turned away at the foot of Record delivered weight.
Under Why it was turned away, tap Moisture, Grade or quality, Weeds or contamination, Site closed or Wrong contract, or type a reason.
Set the Turned away on date, and check the structure under Grain went back into (or Not put into storage yet).
Photograph the Rejection docket if you have one, then select Record turned away.
The tonnes go back into that structure. The load stays in Storage → Activity as Turned away, counts towards no contract and reads as 0 t delivered everywhere.
Fix a load
Open the load on Yield Centre → Loads and select Edit load, or tap the pencil (Edit) on it in Storage → Activity or a structure's Activity. Editing a saved load opens the whole form on one page, not the card.
What happened switches between Load in and Load out. Below it are Harvest or Bought in, Into storage or Delivered off the paddock, and Delivered or Used on farm.
Change anything else, then select Save changes.
It stays the same record, with its dockets and contract. Phase moves each parcel by the difference only: correcting 30 t to 32 t adds 2 t. If later loads have already taken out the grain an edit would move, Phase names the structure that would be short.
Remove a load
Open a load you logged in Phase on Yield Centre → Loads and select Delete load, or tap the bin (Delete) on it in Storage → Activity. Phase asks first, then puts its tonnes back where they came from. Ticked loads on Loads can be deleted together. CBH's loads can't be deleted, because CBH's record is the source. There is no undo once a load is deleted.
Good to know
A harvest load saved with no paddock is listed on Loads under Needs a look.
A paddock with loads and no other yield figure shows a yield from its loads straight away. Which tonnes a paddock's yield uses (the header's or the loads') follows the farm's Harvested | Delivered choice: see Loads in Yield Centre.
If something doesn't look right
I can't find Open the full form or More options. They are gone: every field is in the card, behind More details where it is optional. Editing a saved load still opens the full form.
Save load stays greyed out. Read the list under "Before it can be saved" and go back to the step it names.
A docket from last week saved as today. Since 12 November 2026 the card keeps the docket's date. Open the load, select Edit load and change the date.
There's no Log a load on a harvest. It is a Mow or cut or Rake step. Log the load on the Bale or Chop for silage step.
There's no contract list on the load. The farm has no open contracts. Add one with New contract…, or in Yield Centre → Contracts.