Skip to main content

Log a service or repair, or upload a service invoice

Record a service or repair on the day it was done, upload the workshop invoice, and check a machine's work history.

P
Written by Phase Team

Record a service or repair on the day it was really done, with the machine's hours on that day, or upload the workshop's invoice and let Phase fill in the job. This article also covers correcting a finished service and reading a machine's work history.

The quick answers. Pick the real day under Work done on and the parts and next service are counted from that day, not today. There is no copy or duplicate for a service: when the same service was done on three headers, log it on each header.

Before you start

  • Logging a service, uploading an invoice and finishing a job need permission to record work or to edit the farm.

  • Choosing which reminder an invoice resets needs permission to edit the farm. Adding invoice parts to stock needs permission to edit Inventory.

  • The machine must be in Phase. See Add and organise machines and tools.

Log a service you've already done

  1. Open More → Daily work → Machinery → Machines and open the machine.

  2. To reset one of its service reminders, tap Servicing and select Log service on that reminder; its checklist and parts come with it. For any other service, select Log service at the bottom of the machine.

  3. The New work form opens with Record completed work chosen. Set Work done on to the day the work was done.

  4. Select Continue to completion details.

  5. Under Complete task, fill in Hours at service (Odometer at service on a ute or truck). A service from a reminder also shows Next due meter or Next due date.

  6. Open Technician, cost, notes and readings for the Technician, Actual cost, Problems found and Completion notes.

  7. Check any Required parts, then select Save completed record.

New work → Record work already done does the same from the top of Machinery. A date still to come can't be picked.

How Phase works out the hours for an earlier day

Finishing any job, planned or not, asks Work done on, which starts at today.

  • Work done today: Hours at service starts at the machine's meter now and can't be lower.

  • An earlier day: Phase never uses today's hours. It estimates from the machine's readings either side of that day (services, pre-starts, fuel fills and the meter now) and says so, for example "Estimated from readings on 24 Sep and 8 Oct. Check the hour meter or invoice." With nothing to go on, the box is empty and you type the hours.

  • The hours can be below the meter now, but not below a reading taken before that day or above one taken after it. Phase names the reading in the way, such as "A pre-start on 24 Sep recorded 2,400 hrs, so the hours at service can't be lower".

  • The machine's own meter never goes backwards.

A finished service shows Done on, Logged (when it was entered, if a different day) and Hours at service. A service logged late for an older day doesn't move its reminder's next due backwards or plan a second follow-on job: the newest service wins.

Log a repair instead of a service

Log service on the machine names the job "Service" and the machine's name. Change Category to Machinery repair and it becomes "Repair" and the machine's name (and back again if you change your mind). A name you typed yourself is never changed.

Same service on several machines

You can't copy a finished service to other machines. Log it on each machine from its Servicing tab, on the reminder, with Work done on set to the right day, so each machine's own reminder resets. For a service not done yet, use Start service on the reminder. See Set service reminders.

Correct the date or hours of a finished service

  1. Open the finished service or repair and select Correct date or hours.

  2. Change Work done on and the hours. The same checks apply.

  3. Select Save correction.

Its parts move to the new day. The next service is worked out again (unless someone typed it by hand), and so is the reminder if this was its latest service. The change shows in the job's activity. People who can edit the farm can correct any service; others can correct one they recorded.

Upload a service invoice

  1. In Machinery, select New work → Upload a service invoice.

  2. Select Choose invoice and pick a PDF or a photo.

Phase reads which machine it was for (by serial number, engine number, rego, fleet number or make and model), the hours or odometer, the day the work was done, the work done, problems found and what the mechanic recommends, and every line: parts and fluids with part numbers, labour, travel, freight and other charges.

The page sits beside the review. The review opens as soon as the invoice is read. For a file up to about 3 MB, Phase's copy of the invoice page joins it a moment later, on the left (on a phone, behind Show the invoice). Rest on a field or a line and the place the page prints it is outlined: Machine lights the machine, serial number and rego, and Total lights the subtotal, GST and total. A value the page doesn't print as read says "Not found on the page" under it. Fix anything wrong right in the review (a corrected serial number or rego is what finds the machine), and check anything odd against your original. There is no separate check step or Accept all any more.

Check the service before it's saved

  1. Machine: confirm it, or choose it if Phase couldn't tell. Other machines on the invoice show under Also on the invoice and are linked too; tap one to leave it off.

  2. Status: Done (the default) records the service as finished on the day the work was done, not the day you upload it, with hours and cost. Still to do adds it to Planned with no due date.

  3. Kind of work: Service or Repair. On a service, pick the Service reminder it resets.

  4. Parts and fluids: each line is matched to Inventory by part number, then name. Change it under Matched to, which also has Add new part or fluid and Don't track. Type a name there and New part or fluid called "…" makes the line a new part with that name, in its Name field. For a tracked part, Where it went is Fitted (used on this job; stock is unchanged) or Into stock (kept for later, at the place under Kept at).

  5. Total: check Lines ex GST or Lines inc GST against the invoice.

  6. Select Save service (or Add to Planned).

The job's cost is saved ex GST, with parts, labour and other charges broken down in its notes. The invoice is attached to the job and filed in Documents against the machine.

Hours on an invoice

  • For work before today, the invoice's hours are saved even when lower than the meter now, and the meter stays as it is. An invoice with no hours offers an estimate, such as Use 2,470 h.

  • For work dated today, a reading lower than the meter goes in the job's notes. If the work was earlier, change Work done on.

  • A machine's hours only go up, so a misread figure would stick. On a service marked Done, a reading more than half as much again, or more than 2,000 h, above the meter shows a warning. Tick its box, such as 45,215 h is right, before Save service, after checking the invoice.

  • If you choose the machine yourself, the invoice's hours are kept. Switching between a machine counted in hours and one counted in km swaps the reading or clears it, so a tractor's hours never land on a ute's odometer.

See a machine's work history

Open the machine and tap Work. Under Upcoming and open work and Maintenance history, each line starts its second line with the kind of work, such as Machinery service or Machinery repair, then the date and hours.

An older repair still named "Service" shows as a repair on the Work tab, but the job list shows its old name beside the Machinery repair badge until you rename it.

Good to know

  • On a job still to do, invoice parts go into stock and come off when it is marked done. If you can't edit the farm, record the parts when you finish the job.

  • Without permission to edit Inventory, invoice parts go in the job's notes instead of stock.

  • A part bought on an invoice and fitted shows 0 on hand, so Parts lists it as Needs refill until you give it a minimum level or restock it.

  • While a farm is on trial, a service invoice counts toward the ten invoices Phase reads. A Phase subscription has no limit.

  • Attach on a job adds photos and PDFs (up to 10 MB each) to an open or finished job.

  • Once on each phone or computer, New: upload service invoices offers Upload an invoice; Got it closes it.

If something doesn't look right

  • The service is still in Planned. The form was closed before Save completed record. Open the job on Tasks and select Mark complete.

  • "This does not look like a service or repair invoice." Check the file, or choose another.

  • Saving stopped part way. What is saved stays saved. Select Try again to carry on.

  • The hours won't save. The message names the reading in the way. Check the date as well as the hours.

  • The reminder didn't reset. The service was logged from the machine, not its reminder. Log from the reminder on Servicing, or pick the Service reminder it resets on an invoice.

Related

Did this answer your question?