Skip to main content

Set service reminders

Set service reminders by hours, kilometres or date, and choose who gets the service jobs.

P
Written by Phase Team

A service reminder warns the team before a machine's service falls due, by engine hours, kilometres or a date. Phase can also make the service job itself and give it to the person who looks after that machine.

Before you start

  • Adding, changing and deleting reminders, and choosing who service jobs go to, needs permission to edit the farm. Owners, co-owners and admins always have it. Staff have it unless their access was narrowed. Advisers and view-only logins don't.

  • Plan the service and Log service need access to record work.

  • The machine should already be in Phase. See Add and organise machines and tools.

Find your service reminders

Open More → Daily work → Machinery → Machines, then select Service reminders beside Fleet. The same list is in Inventory → Machinery, and each machine's own reminders are on its Servicing tab.

Every service interval on the farm is listed, most urgent first, under Due now, Due soon, On track and Waiting for a meter reading. Each row shows the interval, the meter, who the jobs go to and when it's next due, for example "Due at 3,250 hrs · 130 hrs left". Needs attention at the top shows due and due soon together.

Add a service reminder

  1. On Service reminders, select Add reminder, or use New work → Add a service reminder.

  2. Under Machine, choose the machine. Type part of its name to search, or choose New machine… if it isn't in Phase yet.

  3. Under What service is this?, type a name or tap a suggestion such as 250 hr service or Annual service.

  4. Under Remind me by, choose Meter (hours or kilometres), Calendar (a date) or Both (whichever comes first).

  5. For Meter, tap an interval under Repeat every, or type one in Or a custom interval, then choose Warn the team. A line underneath says when it falls due, for example "Next due at 3,500 hrs, 380 hrs from now."

  6. For Calendar, choose How often, the date in First due on (Due on for a one-off), and Warn the team.

  7. Leave Add the service to the work queue automatically on for Phase to make the job, or turn it off to be warned only.

  8. List the work under What gets done: one item per line, and add filters and oils with Add part under Parts and fluids.

  9. Select Save reminder.

Setting up a whole fleet. When machines have hours but no reminder, the list says so, for example "4 machines have hours but no reminder yet". Set up all 4 gives each a 250 hr service (10,000 km on an odometer) with a starter checklist, or tap one machine's name to set up that machine only. On a machine's Servicing tab, Add 250 hr service reminder does the same and Set up my own opens the full form. Adjust the interval later to match the operator's manual.

Change a service interval, for example from 250 to 500 hours

  1. Open More → Daily work → Machinery → Machines → Service reminders.

  2. Select Edit on the reminder (or tap it on the machine's Servicing tab).

  3. Under Repeat every, choose 500 hr, or type it in Or a custom interval.

  4. Check the new due point in the line underneath, then select Save reminder.

Once a service is logged, the next one counts from the hours at that service. If that service's next due point was typed in by hand, the line says so, and the new interval takes over from the service after it.

The last service was done before you used Phase. Open Set the next due point yourself and type the reading the next service is due at in Next service due at. This is only used until a service is logged on the machine.

Delete a reminder you don't need

  1. On Service reminders, select Edit on the reminder.

  2. Select Delete reminder, then Delete reminder again to confirm.

Phase stops watching for that service. Work already logged is kept. The bin icon on the row does the same.

If Delete reminder is greyed out (or the bin icon says the reminder has service history), the reminder has already made service jobs, so it stays for the record. Change its interval or date instead.

Start a service, early or on time

  • Plan the service works on every reminder, even one on track, so you can service a machine early before seeding. It opens a new job with the reminder's checklist and parts filled in. Select Plan work to save it. It doesn't record the service as done; that is Log service.

  • If a job is already open for that service, the button reads Open job.

  • The same buttons are on the machine's Servicing tab. The Machines & servicing panel on the Machinery Overview tab shows Plan the service or Open job for a service that is due, due soon or already planned.

  • Log service is only for a service already done. See Log a service or repair, or upload a service invoice.

Choose who service jobs go to

When a service comes due soon, or due, Phase makes the service job itself, with the reminder's checklist and parts, while Add the service to the work queue automatically is on (it starts on). Set Service jobs go to on the machine and every service job Phase makes for it goes to that person. It shows under For me on their notice board, and they get the usual new job notice, once.

For one machine: open the machine, then its Servicing tab, and choose the person under Service jobs go to, near the top. It's also in the machine's Edit form.

For a whole group, such as all the utes:

  1. On Machines → Fleet, turn on Group by type.

  2. On the group's heading, select Service jobs go to… and choose the person.

  3. Phase says how many machines it covers. Select Save.

If the machine already has open service jobs nobody has, Phase offers to hand those over too, already ticked, for example "Also give the 2 open service jobs to Mick Thompson".

Every machine starts on Nobody yet. Each reminder row says who its jobs go to, for example "Goes to nobody yet". Plan the service fills in the same person, and you can change it before saving.

Keep the hours current

Meter reminders count from the machine's meter, in its own unit (hours or kilometres):

  • Open the machine and select Update beside Meter, or Meter on its card in Fleet, or New work → Update hours or odometer. Typing a reading by hand needs permission to edit the farm.

  • Hours typed on a pre-start check update the main machine's meter.

  • On Phase Ultra, hours from John Deere Operations Center and CNH FieldOps update linked machines overnight, shortly before Phase checks the day's reminders. They also update when Machinery opens, at most every four hours. During a free trial, John Deere hours don't update overnight.

  • To update straight away, select Sync on the Machines & servicing panel of the Machinery Overview tab. When the farm also has CNH machines, the buttons read Sync Deere and Sync CNH. See CNH FieldOps: import paddocks and engine hours.

A sync never winds hours backwards: if the machine stops reporting, the higher reading in Phase stays.

Good to know

  • Phase checks every reminder early each morning. A job made while a service was due soon becomes Urgent when the service falls due, if nobody has started it.

  • An automatic service job you delete doesn't come back the next morning for the same service. The next service still gets a job.

  • If the person a machine's jobs go to has left the farm, new jobs are left unassigned. Jobs already made stay as they are unless you hand them over.

  • A meter reminder on a machine with no reading waits under Waiting for a meter reading, then counts from the first reading rather than showing thousands of hours overdue.

  • For a yearly service, choose Calendar, set How often to Every … days, and type 365 in Repeat every (days). A calendar date you change is used even after a service has been logged.

  • Rego isn't a service reminder you build. Fill in Rego expires in the machine's Edit form and leave Remind the team 30 days before the rego expires ticked. The reminder then shows here with a Rego label and the plate, grouped with the services by how soon it is due. Its button is Renewed: pick 3 months, 6 months or 12 months (counted on from the old expiry), or type the date off the renewal notice, then Save new expiry. Renewed needs permission to edit the farm. A rego set up earlier as a yearly Calendar reminder can stay, or be swapped for the date. See Add and organise machines and tools.

  • There's no copy for the same service done on several machines, such as three identical headers. Use Log service on each machine and set Work done on to the day it was done. Each reminder resets on its own.

  • A warranty reminder shows on the list with a Warranty label and Open machine instead of the service buttons. A warranty date is not a service; it's set from Warranty ends in the machine's Edit form.

  • On Fleet, Filter → Status → Service due, Due soon or No reminder shows the machines that need attention. These count services only: a warranty or rego date doesn't. Retired machines' reminders don't show.

  • A machine service is due tells owners, co-owners, admins and staff once, at each person's morning reminder time. It starts on, with email. A machine service is coming up starts off. A rego reminder comes under A machine service is due, a month before and again on the day. Change them in More → Settings → Notifications, under Jobs and machinery.

If something doesn't look right

  • A reminder says the machine has no meter reading yet. Update the machine's meter, or change the reminder to Calendar.

  • There's no Add reminder or Edit button. You need permission to edit the farm. Ask an owner or admin.

  • A service job went to nobody. Set Service jobs go to on the machine and accept the offer to hand over open jobs.

  • A machine has two reminders for the same service. Open the wrong one with Edit and select Delete reminder. If that's greyed out, edit it into the service it should be, or see Contact Phase support.

  • Reminders not attached to a machine can never alert anyone. Select Fix to choose the machine, or Delete.

Related

Did this answer your question?