The Spray Records report is your spray diary: every completed spray with its products, rates, operator, water rate and weather, ready to print for compliance or an audit. It can also add up what went on each paddock over the season. The Machine Use report shows each machine's jobs, hectares, hours, diesel and running cost for the season.
How much chemical went on one paddock this season? Open Spray Records, choose that paddock under Paddocks, and tick Show season totals per paddock. Each product shows its number of passes, its rates added up and the total applied. Then select Download PDF, or Download data for a spreadsheet. The paddock's History tab also lists every finished job.
Before you start
Both reports use completed work only. A pass still to do is not in them.
They cover the season you have chosen in Phase. To see another season, switch season first (see Switch farm or season, and set up seasons).
Print spray records
On a computer, select More in the top bar. On a phone, tap More in the bottom bar.
Under Money & records, select Reports, then All reports.
Under Records and production, select Spray Records.
Narrow it down if you need to:
Crop: one crop, or All crops.
Farms, Paddocks and Product type: tap one or more. These show when there is more than one to choose from. Products not linked to your product library are under Not in library.
Application type: Spraying is on by default. Turn on Spreading to include fertiliser put out with a spreader, or Applying for other applications.
Tick Show season totals per paddock if you want the totals.
Select Download PDF, or Download data → CSV or Excel workbook. On the iPhone and Android apps, these open the phone's save or share sheet.
What each record shows
Each completed spray lists its paddock, crop and date, the area, and each product with its rate and total used. Where they were recorded, it also shows the operator, water rate, method, droplet size, nozzle, wind, temperature, humidity, Delta T, inversion risk, start and finish times, tank mix, buffer zones and sensitive areas.
Each record has a status:
Compliant: nothing is missing.
Warnings: the record is complete but something an auditor may want is missing, such as the water rate, droplet size, method, wind, temperature, humidity, a note on the job, or a link to the product's label.
Incomplete: a core detail is missing, such as the date, area, operator, a product, its rate or its total.
Notes on the job. Notes people wrote on a job show with its record, signed and dated. They print in the PDF under Notes on these jobs and in the spreadsheet's Notes column. Corrections made with Edit what was applied show separately as Record changes. Phase's own wording about where a record came from (such as a John Deere import) is not shown as a note. To add a note, open the paddock's Plan tab and tap Add note on the job.
In the Crop Plan report, Activity notes are these same notes, and the plan's own wording for the job is in Instructions.
Season totals per paddock
With Show season totals per paddock ticked, a table lists every product applied to each paddock in your filters: Passes, Total rate (three passes at 2 L/ha reads 6 L/ha) and Total applied. The totals go into the PDF and into a Season totals sheet in the Excel file.
Phase never guesses when figures can't be added up safely. If passes were recorded in different units, the total says mixed units. If the rates can't be added (a % and a L/ha, say), Total rate shows a dash.
See each machine's use
Open More → Money & records → Reports → All reports.
Under Records and production, select Machine Use.
Select Download PDF, or Download data → CSV or Excel workbook.
At the top are the season's Jobs (with hectares worked), Hours on job, Diesel and Running cost. Below, each machine is listed, most hours first, with its jobs, hectares, hours, diesel and cost, split by job type.
Where the figures come from:
Machines. A job counts for a machine when its planned pass names the machine, or when a John Deere job was matched to one of your machines in Reconcile. Cartage, hire and fees recorded on a job are not machine use.
Hours come from John Deere start and finish times. A machine shows "Hours on 3 of 5 jobs" when only some jobs have them. Jobs recorded by hand have no hours here.
Diesel is litres per hectare times the area worked. On a John Deere job confirmed after Phase read the machine's own log, that is the diesel John Deere measured while working (travel, filling and idling are not included). Otherwise it is the figure from the plan or the job's machine line. The machine says "Diesel measured by John Deere", or "Diesel measured on 12 of 15 jobs". Diesel includes machine defaults means some litres came from the machine's usual per-hectare figure; the PDF marks these with *. The spreadsheet's Diesel basis column says the same.
Running cost is the cost per hectare times the area.
Measured diesel comes with Phase Ultra, the same as Reconcile. It doesn't need a higher John Deere data licence and adds nothing to your John Deere costs.
Good to know
A nozzle entered on a planned spray carries into its completed record. A value reviewed in Reconcile, from John Deere or typed by hand, can replace it.
John Deere work confirmed before Phase recorded machines on jobs is not filled in after the fact.
Livestock treatments are not in Spray Records. They are in More → Daily work → Livestock, then Actions → Reports.
If something doesn't look right
A spray is missing. Check it is marked done, that it is in the season you chose, and that its type is ticked under Application type. A spreader job needs Spreading on.
A record says Warnings or Incomplete. On the paddock's Plan tab, add a note to the job with Add note, or correct products, rates, totals or area with Edit what was applied. For other missing details, such as the operator or weather, reopen the job and record it again (see Fix what was applied, or reopen a finished job). Then open the report again.
A machine is missing from Machine Use. Name the machine on the planned pass, or match it in Reconcile. To fill in diesel and cost where a job has none, set the machine's Diesel L/ha and Running cost $/ha in Machinery (see Add and organise machines and tools).
Hours show a dash. Hours only come from John Deere times.
The download does nothing on a phone. Update the app and try again.