Skip to main content

Sabre Profile Sync (PIE<->Sabre)

How to sync a profile from PlanitEasy to Sabre OR Sabre to PlanitEasy

Robbie avatar
Written by Robbie
Updated over 2 weeks ago

Adding a new Profile into PlanitEasy and Syncing it to Sabre:

  • Step 1: Go to the 'Profiles' page and click on New Individual.

  • Step 2: Fill in the fields that will be sent to Sabre.

  • Step 3: Select the Sync profile to Sabre in real-time checkbox and press 'save'.
    ​

  • Step 4: If the interface ID is not present, it will create a new profile in Sabre.


    ​

    Syncing a Profile from Sabre into PlanitEasy

  • Step 1: Take note of the Interface ID which Sabre gives you for the Sabre Profile (copy it).

  • Step 2: Create a new Profile In PlanitEasy and paste the Interface ID at the top of the profile screen, then click Sync.

  • Step 3: Select the Sabre Account from the drop down and click Continue.

  • Step 4: A pop up will show you all of the fields being fetched from Sabre into this PlanitEasy Profile. You may pick the fields you wish to omit during the Sync (if any), then, Click Continue.

  • Step 5: Done! You will see the fields that have populated with the Sabre data during Sync.

Did this answer your question?