LED Color & Patterns
LED Color + Pattern | Scenario | Visualization |
All LEDs are off | Device is powered off |
|
Power LED is on | Device is powered on, no vehicle is plugged in |
|
Charging LED is on and solid | Device is powered on, vehicle is plugged in, and idle |
|
Charging LED is on and glowing/breathing | Device is powered on, vehicle is plugged in, and drawing power |
|
Error LED is on | Error has occurred, please contact support or property management |
|
Connectivity LED is on and solid | Connection found, trying to authenticate connectivity |
|
Connectivity LED is on and glowing/breathing | Connected to the internet |
|
All 4 LEDs are blinking | Device is updating |
|
Powering On A Device
Once you activate the device (or the breaker), the startup process begins with the illumination of 4 LED lights, followed by a single beep sound.
The power LED, which is the first one on the left, will light up, indicating the device is receiving power. After a brief interval, the connection LED, which is the first one on the right, should also illuminate.
Connecting To The Internet
Subsequently, the connection LED will stay illuminated until it establishes a connection. Once the connection is established, the LED will begin to blink. Therefore, a blinking connection LED signifies that the device has access to the internet.
The connectivity LED is expected to blink continuously.
Now once a vehicle is connected, the charging process will start.
Charging A Vehicle
Once the charger is plugged into a vehicle, the power LED will deactivate and the charging LED (second from the left) will light up.
If the LED remains constantly lit, it implies that a car is connected but either in an idle state, fully charged, or simply not consuming power.
The moment the car begins the charging process, the LED will start glowing.
Need help with anything else? Contact the Plugzio customer care team to have a chat with one of the specialists and discuss your concerns.
β