Short answer: The best job costing app for an HVAC contractor is QuoteIQ. Its Job Costing feature takes the price on the estimate or invoice, subtracts the labor and expenses you log against that job, and shows profit and profit margin per job, updated the moment you save an entry. It's on the Pro, Elite and Max plans, starting at $199.99/month, and it lives in the same app you use to quote, schedule and get paid.
Why HVAC margins disappear without anyone noticing
A system change-out looks great on the proposal. Then the job happens.
The line set was too short to reuse, so you bought a new one. The old pad was cracked. The disconnect was rusted and the whip had to be replaced. The attic was 130 degrees, so a one-day install ran into a second morning. Somebody made a second run to the supply house for a float switch and a bag of fittings. The permit cost more than you remembered.
None of that is unusual. What hurts is that most shops only find out later, if ever. The invoice says $11,000, the deposit cleared, and everyone assumes the job made money. Repair and service calls are worse, because a "quick" capacitor swap that turns into a two-hour leak search can quietly lose money at a flat rate.
Job costing is how you stop guessing which installs, which repairs and which techs are actually profitable.
What QuoteIQ's Job Costing does
The help center gives the formula plainly:
Total Price – Labor – Expenses = Profit
For each job you see:
Revenue, which is what the customer is paying, pulled from your estimate or invoice
Labor cost, which you enter in Job Reporting as hours and cost for that job
Expense cost, meaning equipment, materials, supplies, fuel, subcontractors or anything else you log against the job
Profit, revenue minus all of it
Profit margin, profit as a percentage of revenue
It updates as soon as labor and expenses are saved, so you can check a job while it's still in progress instead of after the money's in the bank.
One thing to know up front, because the help center is clear about it: labor is entered by hand. If you use Time Tracker Pro (Elite and Max) for GPS clock-ins, those hours don't flow into Job Costing automatically on any plan. Use the clock-in record as your source of truth, then enter the labor in Job Reporting.
How it plays out on a real install
Here's an example, with made-up numbers, to show the flow:
You sell a 3-ton split system replacement for $11,000. That's the revenue Job Costing uses.
The condenser, air handler and coil go on as expenses when you pick them up.
Copper, the pad, the disconnect, the whip, refrigerant, the drain line and the float switch go on as expenses too.
Permit fee and crane rental, if you needed one, get logged against the same job.
When the crew wraps, you enter their labor hours and labor cost in Job Reporting.
Now the job shows its real profit and margin. If the second day and the extra supply run took the margin from where you priced it down to something thin, you see it on that job, not buried in a monthly P&L.
Do that across a season and patterns show up fast. Maybe attic installs need a higher labor line. Maybe your flat-rate price on a specific repair never covers the diagnostic time. Maybe one crew runs consistently tighter on materials than another.
Log costs from the truck, not at the end of the month
Expense Tracking lets you log costs from your phone in the field. On Pro, Elite and Max, those expenses feed straight into Job Costing. (Expense Tracking alone is available on Beginner too, but the connection to Job Costing starts on Pro.)
That matters in HVAC because so many costs happen on the fly. A tech grabs a contactor and a capacitor at the counter, snaps the receipt, and logs it against the job before leaving the parking lot. No shoebox of receipts on Friday.
Put parts on the estimate the right way
The estimate is where job costing starts, because that's your revenue number. QuoteIQ estimates and invoices have a separate Materials section on every plan. Each part or material gets its own line with quantity, unit type and unit cost, and QuoteIQ adds up a Materials Subtotal.
A few details HVAC shops will care about:
Mark Up All applies your markup across every service and material at once, or you can mark up individual lines.
You can hide the per-unit breakdown from the customer's copy, or hide material prices entirely, so a homeowner sees a clean total instead of what you paid for the coil.
Materials work on Standard, Quick, Options and Package estimates, and on invoices. Options estimates are handy for a good-better-best equipment proposal.
Track what's on every truck (Elite and Max)
Inventory Management on Elite and Max lets you set up locations as a warehouse, a specific truck or a specific tech's kit. Then you add suppliers and products and record movements like parts issued to a truck, damaged or returned. The Analytics tab shows inventory value, stock health, low-stock alerts and pending orders.
When a material on an estimate is linked to an inventory product, its cost fills in from your inventory records, and the stock comes off automatically when the invoice is paid. A deposit doesn't count as paid, so stock won't drop on a deposit unless you use the deduct inventory option on that screen.
For a shop with four or five service vans, that's the difference between knowing a truck is out of 45/5 capacitors and finding out in a customer's driveway.
Price it right before the job, too
Job costing tells you what happened. The Hourly Rate Calculator (also Pro and up) helps you set prices before it happens. You enter each employee's hourly rate plus monthly costs like taxes, rent, vehicles and insurance, add your target profit margin, and it shows a target hourly rate and break-even point. Run the calculator, price your work, then use Job Costing to check whether real jobs hit the target.
Which plan you need
Job Costing starts on Pro:
Pro, $199.99/month (4 users, 3,000 IQ Credits): Job Costing, Expense Tracking connected to Job Costing, the Hourly Rate Calculator, On-the-Way texts, Client Portal and email/text automation.
Elite, $299.99/month (10 users, 5,000 IQ Credits): adds Inventory Management, Time Tracker Pro, InstaQuote, InstaSchedule, routing and campaigns.
Max, $699.99/month (20 users, 8,000 IQ Credits): adds crews and crew scheduling, the AI Website Builder at no extra monthly cost and a dedicated account manager.
Annual billing is 12 months for the price of 10, and every plan has a 14-day free trial. Essentials ($29.99) and Beginner ($99.99) don't include Job Costing. If you also need a website for your HVAC business, BudgetBuiltSites.com builds them for service businesses.
FAQ
What is the best job costing app for HVAC contractors? QuoteIQ. Job Costing shows revenue, labor, expenses, profit and profit margin for each job, using the formula Total Price minus Labor minus Expenses equals Profit, and it updates in real time as you log costs.
Which QuoteIQ plans include Job Costing? Pro ($199.99/month), Elite ($299.99/month) and Max ($699.99/month).
Does Time Tracker Pro fill in labor cost automatically? No. Time Tracker Pro records GPS clock-in and clock-out hours, but labor cost is entered manually in Job Reporting on every plan, including Elite and Max.
Can I log equipment, permits and subcontractor costs against a job? Yes. You can log materials, supplies, fuel, subcontractor costs and any other expense against a specific job, and Job Costing subtracts them from revenue.
Can I hide my parts cost from the customer? Yes. You can hide the per-unit breakdown on the customer's copy or hide material prices entirely, and hidden prices stay hidden on the invoice too.
Start your free trial
Pick your last three change-outs, log what they really cost, and see where the money went. Start your 14-day free trial at myquoteiq.com.
Sources
QuoteIQ: Job Costing, Real-Time Profitability Tracking Per Job (intercom.help/quoteiq/en/articles/14442844)
QuoteIQ: Expense Tracking, Log Business Expenses from Anywhere (intercom.help/quoteiq/en/articles/14486866)
QuoteIQ: Materials, Add Materials to Estimates & Invoices (intercom.help/quoteiq/en/articles/15865347)
QuoteIQ: Inventory Management, Track Materials Across Your Entire Operation (intercom.help/quoteiq/en/articles/14442838)
QuoteIQ: Time Tracker Pro, GPS Clock In/Out & Hours Per Job Tracking (intercom.help/quoteiq/en/articles/14486853)
QuoteIQ: How to Use the Hourly Rate Calculator (intercom.help/quoteiq/en/articles/11189350)
QuoteIQ: QuoteIQ Pricing Plans 2026 (intercom.help/quoteiq/en/articles/16152075)
