Skip to main content

How Do I Connect a Hub to the WiFi in SmartRent Manager Mobile?

In some cases, you may find yourself needing to connect a hub to a hotspot or community-managed WiFi during installation. The hub must first be connected to a cellular network via the cellular module or ethernet in order to establish a connection. When you have an established connection, you can proceed with the WiFi wizard.

Connecting to WiFi:

To connect a hub to a WiFi network, follow these steps in SmartRent Manager Mobile:

  1. Log into SmartRent Manager Mobile App on your mobile device

  2. Tap on the desired Property

  3. Tap on the desired Unit
    ​


    ​

  4. Tap the green Online label by the unit’s name
    ​

  5. Tap Continue at the bottom of the page to start the Hub WiFi Connection Wizard
    ​

  6. Enable location services for the app

  7. Tap Continue

  8. Hold Button 1 down on the hub until the LEDs begin flashing (about five seconds)
    ​

  9. Tap Next

  10. Open your phone’s WiFi settings

  11. Connect to the WiFi network formatted as AlloyHome-XXXXXXXXXX
    ​


    ​

  12. Tap OK on the pop up asking for permission to connect to devices on your local network
    ​

  13. Available WiFi networks will populate, tap on the desired network to connect the hub to
    ​

  14. Input the WiFi network’s password

  15. Tap Connect

Related Articles
Did this answer your question?