Skip to main content

How to Design Flat Roof and Ground Mount Solar Layouts with the AI-Assisted Design Tool

Updated over a week ago

Follow the steps below to create a flat or ground-mounted solar layout using the AI-Assisted Design tool.


Step 1: Set the crosshair over the home and click “Run AI Design”.

Step 2: The AI-Assisted design will be generated automatically.

Step 3: Click on the "Edit" icon in the left corner.

Step 4: The panels are shown in edit mode. Click the "Draw Facet" icon.

Step 5: To create a facet for a flat roof type or ground mount, turn on the “Flat” toggle before drawing.

Step 6: To draw a ground mounted facet, toggle “Ground Mount”, otherwise continue with “Flat”.

Step 7: After drawing a flat facet, click “Done”.

Step 8: The facet’s details will open on the right. You can adjust azimuth and shading if necessary. Click “Done” to continue.


Step 9: The facet will fill with panels.


Step 10: To exit edit mode, toggle “Edit” off.


Step 11: When the design is complete, click “Save” to continue building your proposal.

Did this answer your question?