As illustrated in the picture below it can sometimes be difficult to identify a valve or see if it is open or not:
So to mitigate this problem ValveTrack has reference pictures so that the ROV pilot can see how the valve looks like and how the open / closed position is identified.
You have many valve of the same kind? Then you have functionality to reuse these pictures for multiple valves - you do not need to do this manually one by one.
Upload a reference picture for open position and for closed position, so that it is available in the logs for guidance
You can easily do this by uploading a picture directly to the valve or take a picture on the fly using your handheld device:
The picture is thus available on the valve in ValveTrack but most importantly in the log entries:
When you create a new valve log or status check the reference picture is there to guide you:
Reuse a picture from a verified open/closed check as reference picture
You can also simply use the as observed image and the as left image as reference pictures:
Reuse the reference picture for multiple other valves
If you have a reference picture and you know it is relevant for multiple other valves you can simply push them as reference:
Then you will open the search dialog and select all the relevant valves based on your criteria:
Then review
And share:
