Skip to main content

Hydropack: How to Change the Water Filter

Updated this week

Required Tools:

  • Number one Phillips screwdriver

  • Allen wrench set

  • Pliers

  • Dry towel

Replacing the Water Filter

  1. Turn off the machine by flipping the breakers from right to left, waiting two seconds between each flip.

  2. Remove panels blocking access to the water filter using your Phillips screwdriver or Allen wrench.

  3. Place a dry towel at the base of the filter to catch potential water spillage.

  4. Locate the water filter within the machine.

  5. Twist off the nut holding the filter clasp by hand. If tight, use pliers to loosen and remove it.

  6. Remove the clasp and take out the old filter.

  7. Place the new filter into the casing.

  8. Replace the filter clasp.

  9. Securely fasten the nut, ensuring it is tight and properly aligned.

  10. Replace any removed panels.

  11. Turn the machine back on by flipping the breakers.

Note: Consult your specific Hydropack model's manual for precise instructions.

Did this answer your question?