Skip to main content

Water Filter Replacement

How to Replace Water Filters on Your Hydropixel

Updated this week

Maintaining your Hydropixel water filtration system is crucial for optimal performance. Follow this step-by-step guide to replace your water filters efficiently:

Front Panel Filter Replacement:

  1. Open the front panel of your Hydropixel

  2. Grasp each filter and lift from the bottom

  3. Turn the filter clockwise to loosen

  4. Remove the old filter

  5. Insert the new filter

  6. Turn the new filter counterclockwise to tighten

  7. Repeat for all four filters

  8. Close the front panel

Side Service Panel Filter Replacement:

  1. Locate the side service panel with the G1, 100 CC filter

  2. Remove O-rings and C-clamps from the 2L joints

  3. Have a dry towel ready to catch any water

  4. Push in the O-ring and pull tubing to remove L-joints

  5. Slide out the old filter

  6. Use a flathead screwdriver to pry off L-joints

  7. Attach L-joints to the new filter

  8. Replace the filter in the holster

  9. Reconnect the piping

  10. Replace C-clamps

  11. Close the side panel

Pro Tip: Work carefully and keep a towel handy to manage any water spillage during the process.

Did this answer your question?