Wifi Printer Installation
Your printer will have a manual on how to connect it to your wifi so please review those documents first.
This guide will provide you with instructions for our standard Munbyn printer and generic guidance for other printers.
EMenu Munbyn Printers
Other printer guidance
Emenu Munbyn Printer
The WIFI printer has its own wifi, so when the printer is ON you can connect to the wifi printer via laptop/mobile/tablet
WIFI Name: WIFI printer
Password: 012345678
Then via google / safari
Go to browser
And go to 10.10.100.254
It will ask for username and password - ALWAYS:
User name - admin
Password - admin
Once that page is open go to
STA setting
click scan
click on your network (the one used by the site, they want they want to connect their system to)
add THEIR password for their wifi network
Click on - Obtain IP address automatically - enable
save
Ok
Go to - Restart
Click on OK
Printer will print paper with IP address (if not switch printer off - hold feed button while switching it on and release both at the same time to make it print)
To Check the printer is connected.
Connect phone or computer to the same WIFI you used for the printer
In a web browser enter the new IP address from the printer. In the example 172.21.1.55
If you get the config prompt for username / password or are logged in the printer is connected. If the browser cannot load the page - there is a problem
Go to the live orders screen. Choose an order and use the dropdown to print
On you emenu dashboard click the top left 3 lines | Configuration | Devices - click add a printer - Printer on printer connection - add the printer name -
Print type - select to esc/pos/LAN , enter the IP address and run a test print, if it does not work then try ESC/POS/Lan 2
Add IP address on IP address
Add IP to devices on the dashboard screen - for example:
172.21.1.55 - Bar
172.21.1.57 - Kitchen