While the Oh! can be used Online, you can use the device Offline as well, by using the buttons on the device itself. In this article, we will go over what each button does so you know how to operate your Oh!

Buttons Mapping for the Oh!

When you first unbox your device, you should be able to see the full device like the image below. All the instructions below are considering this same orientation for the device.

Individual button instructions

When the device is off, pressing any button will power it on. Once on, the buttons work as follows:

	Start and Stop / Power Off This button can start and stop vibration for the device with a single press. It can also power the device off when you press and hold it.
	Action Button This button swaps between Bluetooth mode (Green LED) and Online Mode (Pink or Pink and Blue LED) when held.
	Left Button This button decreases frequency for the vibration for the device
	Right Button This button increases frequency for the vibration for the device
	Plus Button This buttons increases intensity of the vibrations for the device
	Minus Button This buttons decreases intensity of the vibrations for the device

Audio Mode Controls

Whenever the device is off, if you press and hold the "+" button (Plus button) the device will start in Audio Mode, you can also access this mode directly from the app.

When in Audio mode, the device displays a Teal LED light.

In case you are not sure what Audio mode is, please check out our guide on Audio mode.

In this mode, the device's button will behave differently. Here's the instructions for them

	Previous Track This button will move backwards in your track selection when possible
	Next Track This button will move forwards in your track selection when possible
	Volume Up This button raises the volume for your track
	Volume Down This button lowers the volume for your track