Skip to main content

How to control your Oh! via Remote Control

Updated this week

The Oh! is able to be controlled remotely via Bluetooth on Online in handyfeeling.com

Let's take a look on how to achieve this


Make sure your Oh! is in Online Mode

Press and release the Action button so that the LED starts pulsing with a magenta Light.

Once The light starts pulsing slower, it means that you're connected.

If the LED instead flashes red, it means that it failed to connect. In that case, try repeating this processes a few more times.

If it still doesn't work, please contact us:


Method 1: Via Bluetooth on Handy Onboarding App

Once you connect your Handy to the Handy Onboarding App, you should be able to see a button on the top left with three horizontal lines, that opens the main menu of the app where you can find the Option called Control

Once you click there, the controls will appear on screen as the image below. There are 3 main methods of controlling the devices but only one can be used by the Oh, shown below.

HVP (Handy Vibration Protocol)

This mode is exclusively for the Oh! It works exactly the same as the handyfeeling web page shown below.


Method 2: Via Online mode on handyfeeling.com/remote

Once you are able to connect to your network, you can then visit handyfeeling and access the remote controls tab to control a Handy or Oh! via the internet. The main advantage in this method is that distance shouldn't matter.

To do this, make sure your device is able to connect to the internet by following this guide on preparing the Oh! to go online. Make sure to take note of your Connection Key and in case you can't find it, here's a guide on how to find or replace your Connection Key.

With your Connection Key ready, go to handyfeeling.com/remote and select Connect on the top right of the screen.

A new window should appear, input your connection key on the field saying "Enter connection key..." and once the button changes from Connect to Connected, you can then start controlling your Oh! remotely from the website.


Method 3: New Handyfeeling

Using the New Handyfeeling webpage, you will be able to use the Remote Control there as well.

Similarly to Handyverse or the legacy Handyfeeling, connect the the device using the button label Connect Device.

Afterwards, click on Remote Control button on the left side menu

The Interface will now allow you to adjust the same settings as before, as well as getting a shareable link that will give the control of your device to another person.

You can quickly see a simulator that will showcase the frequency of the vibration you have currently set up on your device.


Need more help?

Please use the chat box on the bottom right corner of the screen or email us via contact@thehandy.com


Did this answer your question?