To ensure that you always have access to the latest features and improvements, we periodically release updates to our app and to the pump's firmware.
ℹ️ The firmware is the software built into your Perifit Pump itself, while the app communicates with the pump - so it's important to keep both the app and the firmware up to date to ensure everything works smoothly.
How to update the firmware of my Pump ?
Make sure your Perifit Pump app is up-to-date.
Check the App Store or Google Play Store for any available updates.Charge your pump to at least 80%.
Open the app and connect your Perifit pump.
Start a single pumping session. (You don’t need to complete the full session - just start it and wait a few seconds. This allows the app to detect whether your pump’s firmware is up-to-date.)
End and save the session.
After saving, a pop-up will appear prompting you to update the firmware.Follow the on-screen instructions to complete the firmware update.
🔁 If you have a double pump, repeat the same steps for your second pump. Each pump needs to be updated individually.
ℹ️ If the firmware update process is interrupted, please follow these steps:
Perform a reset of the pump by holding the power button for 15 seconds
Ensure that the pump is fully charged
Try to make the update again.
Check the current firmware version of your Perifit Pump:
You can check the current firmware version of your Perifit Pump by going to the "Settings" → "Your Pump". You’ll see the serial number of each connected pump, and just below it, the firmware version will be displayed.
How to update the application Perifit Pump?
To make things easier, we strongly recommend enabling automatic updates for the Perifit Pump app on your device. This way, your app will always stay up to date without you having to think about it.
Here is how to enable automatic app updates
📱 On iPhone (iOS)
Open your Settings app.
Scroll down and tap App Store.
Under the Automatic Downloads section, toggle App Updates to ON (green).
Optional: Make sure Automatic Downloads are enabled under Mobile Data if you want updates to download when you're not on Wi-Fi.
🤖 On Android
Open the Google Play Store.
Tap your profile icon (top right corner).
Select Manage apps & device.
Tap Manage, then find and tap on Perifit Pump.
Tap the three dots in the top-right corner.
Make sure Enable auto update is checked.
If automatic updates are not enabled, you’ll need to regularly check the App Store (iOS) or Google Play (Android) to manually install any new updates. If a new version is available, an update button will be displayed.