Use this when a spray, spread or other application covers only part of a paddock: a weed-detection spot spray, a patch of lime, a missed strip, or a patch spray around a dam. You can plan the pass over a share of the paddock, and you can record a job that covered only part of it. Either way the rate stays the label rate, and the product needed, its cost and the stock taken off follow the area.
The quick answer. On the spray (in Crop Plan Studio or on the paddock's Plan tab), tap Add a detail → Part of the paddock (or the Area label if it has one), choose Part of it under Area to cover and enter the percentage of the paddock (or the hectares). Don't lower the rate to allow for a spot spray: keep the label rate and set the area instead.
Plan a spot spray over part of a paddock
You can do this for a spray, spread, apply, harvest or operation pass, in Crop Plan Studio or on one paddock's Plan tab. A harvest includes Mow or cut, Bale and Chop for silage, so 43% of a paddock can be planned for silage with grain or hay off the rest.
Open Crop Plan Studio: Plan on a computer, or More → Paddocks & crops → Crop Plan Studio on a phone. For one paddock you can use Map → the paddock → Plan instead.
Select the paddock, or several paddocks.
On the pass, tap Add a detail → Part of the paddock (or the Area label, once it has one).
Under Area to cover, choose Part of it. Whole paddock is the default.
Enter how much of the paddock the pass covers as a percentage. With one paddock selected you can tap ha and enter hectares instead. The line under it says what that comes to, for example "20% · 30.8 of 154 ha".
Select Save under it.
With several paddocks selected, the part is a percentage of each one. If they were planned over different parts, the card says Part of paddock, and choosing here sets them all.
How the part changes the plan
The rate stays the label rate. What changes is how much product the paddock needs and what it costs. A 2 L/ha spot spray over 20% of a 154 ha paddock needs about 62 L, not 308 L.
On a spray, machine and other cost lines stay whole-paddock, because a spot sprayer still drives the whole paddock. On a harvest, everything follows the part: the machine and contractor costs, the bales or tonnes planned and the products. A paddock with silage cut off part of it reads as harvested only once the rest has no harvest still to come: grain or hay planned on the rest keeps it open, and a rest left with nothing planned doesn't.
Once it is saved:
The pass says 20% of paddock beside its name (and on its Area pill when open), and its $/ha is per paddock hectare.
The paddock's Plan tab (Map → paddock → Plan) shows the same, and the part can be changed there too.
The paddock's cost, the gross margin, the nutrients, Inputs and the Inputs Needed report, Inventory demand and shortfalls, the Overview finance and inventory tiles, Financial Performance, the crop plan report and the Studio's season plan report all count the product over that part.
Copying the pass to other paddocks, copying the plan, saving it as a template and starting next season from this one all keep the share.
When the work is done, Mark done opens with Area done on Part of it at the planned percentage, so the amounts used start from the real rate over that part.
Record a patch spray or part of a paddock as done
When only part of a paddock was done, say so when you mark it done. This works on every kind of pass: a patch spray, a strip sown, or 43% of a paddock cut for silage.
On the pass, tap the arrow beside Mark done and choose Done on part of the paddock… (or select Mark done and go to Area done).
Under Area done, tap Part of it. (Whole paddock is the default. A pass planned over part of the paddock already opens on Part of it at the planned percentage.)
Type the hectares (or acres) done in How much was done, or tap % of paddock and type a percentage. Phase says what that comes to: "11% of the paddock" for hectares, or "26.2 hectares of 262 hectares" for a percentage.
Check the amounts on What went on. They follow the area: 1.2 L/ha over 28 ha shows 33.6 L, not the whole paddock's 314 L. On a harvest, the yield and anything used follow the area done.
Go on through Conditions and Who did it, then select Mark done.
An amount you type yourself stays as typed, with a "Plan for this area" line under it when it is well away from the plan.
Stock comes off, and the job is costed, for the area done. On the Plan tab the job then shows 28 of 262 ha in bold beside Done 9 Apr 2026, its cost reads /ha done, and the job's dollar total sits beside the hectares. If a missed strip was recorded as a second pass, the hectares are added up and it says · 2 passes. A finished spray's water total is for the hectares done.
Other paddocks. If Phase then offers Mark same job on other fields?, each paddock has its area in a box. Change it for any paddock where only part was done.
Fix an old patch spray recorded as the whole paddock
Before 9 October 2026, lowering the area on Mark done costed the record for the smaller area but still took the whole paddock's product off stock. Records already saved keep the area they were saved with.
Open Map, tap the paddock, then tap Plan.
Pick Actual on the finished spray.
Select Edit what was applied.
Change Area done to the hectares actually sprayed.
Select Save changes.
Each rate stays, the totals and stock follow the new area, and the change is noted on the record.
Good to know
Nothing changes until a pass is set to Part of it. Every existing pass is the whole paddock.
A part of 98% or more counts as the whole paddock.
Seeding, tillage and harvest passes don't have Area to cover.
Set a season target… under Nutrients won't use a part-paddock pass to bring a whole paddock up to its target.
A cost charged per tonne of product (cartage, say) on a spot spread is still worked out on the full rate.
Recommendations don't have a part-paddock option.
If something doesn't look right
The product needed is for the whole paddock. Check the pass's Area is set to Part of it, and that you selected Save changes.
Phase says the area is more than the paddock. Check the hectares, or choose Whole paddock.
The whole paddock's product came off stock for a patch spray. Change Area done with Edit what was applied, as above.