Skip to main content

TRAC: Unlimited Data Allowance FAQ

How the Fair Use Policy works on Unlimited TRAC subscriptions

On an Unlimited subscription, there's no overall cap on how much data your domain can collect. Instead, each search has a monthly fair use allowance under our Fair Use Policy (FUP). This article covers the most common questions about how that works.


Are there any limits on Unlimited data?

Yes, at search level. Each search has a monthly fair use allowance. The amount is specific to your subscription and is set for your whole domain, so every search has the same allowance.

If you're not sure what your fair use allowance is, your Account Manager can tell you.


How can I keep on top of my searches' fair use?

TRAC sends fair use alerts to you and your Account Manager at three points:

  • Predicted to exceed: sent within the first hour of a search going live, if it's on track to go over its monthly allowance

  • 80%: sent when a search reaches 80% of that month's allowance

  • 100%: sent when a search reaches its full allowance for the month

You can also check usage at any time on your department's Overview page (Platform settings → TRAC Departments → your department). At the bottom, you'll see every running search and how much data it's using.


What happens if a search goes over the fair use limit?

You and your Account Manager get a notification asking you to check the search and adjust its setup. Your Account Manager can help you work out the best way to bring it back within its allowance.

If a search is collecting more than expected, you can usually bring it down by:

  • Tightening keywords: swap broad terms for more specific phrases

  • Adding exclusions: filter out irrelevant topics, spam or unrelated meanings of your keywords

  • Narrowing languages or locations to only those you need

  • Removing sources that aren't relevant to the question you're answering

  • Splitting a broad search into smaller, more focused searches


Does historical data count towards the fair use limit?

Yes. The full historical request counts towards the allowance for the month you request it in.

For example, if your fair use allowance is 1.5 million mentions per search per month and you request 1 million mentions of historical data covering the last 12 months, all 1 million count towards this month's allowance. That leaves 500,000 for the rest of the month.

If you need a large historical request, it's worth speaking to your Account Manager first.


How are premium sources handled on an Unlimited subscription?

Premium source data counts towards your search's fair use allowance, like any other source. Premium sources also have their own separate allowance.

For example, Print and CN data have a set number of mentions assigned to each department that holds the licence for them. Only departments or clients with the licence can use these sources in their searches.

If your department needs access to a premium source, or more allowance for one, contact your Account Manager.


Does the Fair Use Policy change when Departments are enabled?

No. Your fair use allowance is set for the domain and applies to every search in the same way, whichever department it's in. Departments don't have their own FUP and can't change it.

You'll still see total data usage per department on the TRAC Departments page, but on Unlimited this is for information only. It isn't a cap.


Who can I talk to about my fair use?

Your Account Manager can help you review searches that are using a lot of data and suggest ways to refine them. You can also email us at support@pulsarplatform.com or message us via the in-app chat.

Did this answer your question?