Skip to main content

📋 How to Fill Out a Form for a Customer - v4

Fill out a customer's agreement, pick-up or return form yourself from the Forms button on their rental card, when each form unlocks, and letting a customer redo the pick-up form (V4, original or new forms)

Your customer's forms (rental agreement, pick-up form and return form) are sent to them automatically as soon as they book a trailer. If you'd rather fill out a form yourself, you can do it from the admin console.

This works the same whether you are using the original forms or the new forms.

📋 Open the Customer's Forms

  1. In the admin console, go to the Rentals tab.

  2. Find the customer's card.

  3. Click the Forms button on the card.

  4. This opens a page with all three of the customer's forms.

🔢 Forms Must Be Completed in Order

  1. Rental agreement

  2. Pick-up form

  3. Return form

• Each form stays locked until the one before it is completed.
• The pick-up form unlocks only when the rental agreement is completed and it's the day the rental starts. It opens the morning of the pick-up day, in your time zone. Until then, the customer's forms page tells them which day it opens.
• The return form unlocks a few hours after the pick-up form is completed.
• Once a form is completed, it can't be opened, changed or submitted again. The one exception is the pick-up form, which you can let the customer redo (see below).

📸 Photos on the New Forms

On the new forms, the photo step opens the camera so photos are taken at the time the form is filled out.

• Photos that were already taken can't be uploaded. This makes sure every inspection has current photos, not older ones.
• You can't add photos to a customer's rental yourself, including photos the customer texted or emailed you.

💡 Pro Tip
This only applies to the new forms. The original forms still allow uploading saved images.

🔁 Letting a Customer Redo the Pick-Up Form

If a customer filled out the pick-up form wrong, for example with the wrong photos:

  1. Open the rental.

  2. Go to Documents.

  3. Press Redo next to the pick-up inspection.

• Redo only applies once the pick-up form has been completed. If the customer hasn't completed it yet, there's nothing to redo, so they can just fill it out.
• The old pick-up form is kept on record, not deleted, and the customer can fill it out again.
• If the pick-up form marked the trailer out before its pick-up day, the rental goes back to Reserved.
• The pick-up message with the lock code that already went out can't be taken back. If that matters, change the lock code.
• Redo isn't available once the rental is returned.

⚠️ Marked picked up by mistake, or the renter never took the trailer? Don't use Redo. Open the rental and tap Undo pick-up instead. It puts the rental back to Reserved without sending any messages. See 📋 How to Complete Customer Check Out or Check In Forms.

⏭️ Skipping the Pick-Up or Return Form

You can skip the pick-up or return form by using the Mark picked up or Mark returned button, depending on where the customer's rental is at.

The rental agreement can't be skipped.

Skipping only skips filling out the form. Marking a rental returned still clears the trailer for the next rental and opens the calendar back up, just like the return form. Neither one releases the deposit. You release a hold or refund a deposit yourself from the rental. See 💰 How to Refund or Capture a Security Deposit. The one exception is Late returns: late fees are calculated from the return form, so if no return form is completed, no late fee can be calculated.

🔄 You and Your Customer See the Same Forms

The forms look the same to you and your customer. If either of you completes a form, it shows as completed for the other one too.

Did this answer your question?