To ensure optimal performance and compatibility of your TV Adapter, it is recommended to keep it updated with the latest firmware version. If you experience any operational issues, updating the firmware may help resolve them. Follow these steps to safely and easily complete the update.
1. Connect the TV Adapter to a Stable Power Source
To avoid interruptions during the update, use a wall USB charger instead of your vehicle's USB port. This will ensure continuous and stable power supply.
2. Connect to the Adapter from Your iPhone
Open the Wi-Fi settings on your iPhone.
Search for and select the network AutoSky-XXXX (where "XXXX" corresponds to your device).
Enter the password: 88888888 (eight times the number 8).
Ensure that mobile data remains enabled throughout the process.
3. Access the Configuration Menu
Open your web browser on your iPhone.
In the navigation bar, enter the following IP address: 192.168.2.1
This will take you to the TV Adapter’s configuration menu.
4. Perform the Firmware Update
Scroll down to find the Online Update section.
Tap the Update button and wait for the download and installation to complete.
5. Important: Do Not Disconnect the Adapter During the Update
Do not turn off or disconnect the adapter from the power source until the update is fully completed.
Disconnecting it prematurely may cause damage to the device and affect its operation.
6. Verify the Adapter’s Status
Once the update is complete, the adapter's LED indicator should turn white.
Disconnect it from the power source and reconnect it to your vehicle’s USB port.
Your TV Adapter is now updated and ready for use. If you experience any issues, review the steps again or contact AutoSky technical support.