Skip to main content

Hydropixel: How to Clean Bottom Tank

How to Clean the Bottom Tank of Your Hydropixel

Updated this week

Maintaining your Hydropixel aquarium requires careful cleaning of the bottom tank. Follow these step-by-step instructions to ensure a thorough and safe cleaning process:

Preparation:

  1. Turn off your Hydropixel completely

  2. Remove the bottom panel at the back of the unit

  3. Disconnect any bungees and place them behind the tank

Disassembly:

  1. Cut zip ties securing UV light and water level sensor wires

  2. Remove C clamps holding tubings

  3. Push in O rings and carefully remove tubings

  4. Lift out the bottom tank, placing it on a clean towel

Cleaning:

  1. Take the tank to a sink or use an outdoor water hose

  2. Gently spray the tank with water

  3. Optional: Use a cleaning solution of 1 part white vinegar to 1 part water

  4. If using vinegar, rinse thoroughly to remove all residue

Reassembly:

  1. Replace the bottom tank securely

  2. Reattach tubings, ensuring they are firmly in place

  3. Reinstall C clamps

  4. Reconnect UV light and water level sensor wires

  5. Secure with zip ties

  6. Replace bungees

  7. Put the bottom panel back on

Always handle your Hydropixel components with care and ensure all connections are secure before resuming normal operation.

Did this answer your question?