Skip to main content

Hydropixel: How to Replace a Fuse Guide

Updated this week

Before You Begin:

  • Obtain approval from the Aquaria team to avoid voiding your warranty

  • Gather a small flathead screwdriver

Safety First:

  1. Power down and unplug the Hydropixel machine completely

Replacing Internal Fuses:

  1. Open the side service panel with your screwdriver

  2. Locate the motherboard at the top left

  3. Find the power relay board below the motherboard

  4. Identify two light blue fuses in an upside-down L shape

  5. Carefully pry out each fuse using the screwdriver

  6. Insert new fuses, ensuring they are securely placed

  7. Close the side service panel

Replacing External Fuse:

  1. Move to the back of the machine

  2. Locate the fuse casing next to the female power connection

  3. Use the screwdriver to remove the fuse casing

  4. Replace the fuse with a new one

Important Reminder: Always consult with the Aquarius team before performing maintenance to protect your warranty.

Did this answer your question?