You can view RoboCap's camera feeds directly from your RoboCap app for Android. Support for iOS is coming soon.
Step 1: Turn On RoboCap
Connect RoboCap to a power bank using the provided USB-C cable.
Turn on RoboCap using its Power Switch.
Wait approximately 5–10 seconds for the device to start up.
Important: Keep RoboCap connected to the power bank while using the app.
Step 2: Open the RoboCap App
Turn on your RoboCap.
Open the RoboCap app on your phone.
Select RoboCap.
Note: If your phone is already connected to RoboCap's Wi-Fi, the app will automatically connect to your device. You can skip Step 2.
Step 3: Connect to RoboCap's Wi-Fi
Open your phone's Wi-Fi Settings.
Find and connect to your RoboCap's Wi-Fi network, usually named
Robocap_xxx.Enter the default Wi-Fi password: 12345678.
Return to the RoboCap app and wait for it to finish loading.
Step 4: Open Live Preview
Once connected, the app will open the Status page.
Tap the Camera tab.
View the live feeds from RoboCap's six cameras.
Note: Live preview is unavailable while RoboCap is recording. Stop recording before using this feature.