How to Format RoboCap's SD Card Using the App

You can format RoboCap's SD card directly through the RoboCap app on your Android or iOS device.

Important: Formatting permanently deletes all recordings and captured data stored on RoboCap. Make sure you've backed up any files you want to keep before proceeding.

Step 1: Connect to RoboCap

Connect RoboCap to its power bank and turn it on.
Open the RoboCap app and select RoboCap.
Connect your phone to RoboCap's Wi-Fi network, usually named Robocap_xxx.
Enter the default Wi-Fi password: 12345678.
Return to the app and wait for it to connect.

Note: If your phone is already connected to RoboCap's Wi-Fi, the app will automatically connect.

Step 2: Open Format Settings

Tap the More tab at the bottom of the app.
Select Format and Reset Settings.
Tap Format SD card.

Step 3: Confirm Formatting

Read the warning about permanent data deletion.
Type FORMAT in the confirmation field.
Tap Confirm to begin formatting.

Important: Keep RoboCap powered on and connected throughout the process. Do not disconnect or turn off the device while formatting.

Step 4: Wait for Formatting to Complete

Wait a few minutes for the formatting process to finish.
Once completed, a confirmation message will appear stating that the SD card is empty and ready.
Tap OK.

Your RoboCap's SD card is now formatted and ready for new recordings.