Skip to main content

The paddock sheet

Open a paddock from the map to see its plan, soil, notes, yield, livestock and history in one place.

P
Written by Phase Team

The paddock sheet opens when you tap a paddock on the Map. It keeps one paddock's plan, soil, notes, yield, livestock and history together, without leaving the map.

Where to find it

Open Map and tap a paddock (on a computer, click it). Every other paddock link opens the same sheet: links in Financial Performance and notifications, QR codes and Phase Agent's Open field sheet.

The tabs

The tabs run in one row across the top: Plan, Soil, Notes, Yield, Livestock (only where a mob is linked to the paddock) and History. Since 1 November 2026 the sheet is slimmer, but nothing has been taken away. The first time you open a paddock after the change, Your paddock sheet has had a refresh shows where buttons moved; Got it closes it on every device.

  • Plan: the season and its planned $/ha at the top, with Plan tools beside it (New recommendation is its first item). Under it is the crop line (crop, variety, hectares, $/ha and total) with Details, and the nutrients as four rings, N, P, K and S, applied against planned. Then every pass of the season reads open, with nothing to expand, in date order; the next one to do carries Next and Mark done. Add and New reco are pinned to the foot of the sheet. The sheet's size button switches between Full screen and Show the map again, and nothing scrolls sideways on a phone. The Plan tab and Crop Plan Studio show the same plan sheet, so a pass looks and works the same in both.

  • Soil: pick the sampling site at the top. Each reading (pH, organic carbon, P, K, S and the rest) is one row with its trend, and pH says Low, In range or High. Tap a row for its chart. pH down the profile shows deeper tests, and Historical soil results holds the full table. Add (Manual soil test, Bulk add spreadsheet, New site) and Open Soil Centre are at the top.

  • Notes: Add a note, with Speak, Photo and Pin beside it, then the paddock's open and Resolved notes, with a Notes | Timeline switch. See Add and follow up notes on the map.

  • Yield: one row per harvest, newest first, each saying how it compared with the farm's average for that crop that season. Tap a row for its figures, its loads line (CBH LoadNet loads and loads logged in Phase apart, such as "Loads: CBH 53.3 t · 1 load + Manual 48.4 t delivered · 1 load = 2.43 t/ha over 42 ha"), Show on map and Delete. Yield map (see View and use yield maps), Open Yield Centre and the farm's Harvested | Delivered choice are at the top; flipping it here flips it everywhere. A paddock with loads and no yield entered shows a yield from its loads. A yield made from loads has no Delete: it says to change the loads in the Yield Centre's Loads.

  • Livestock: mobs in the paddock.

  • History: seasons down one line. Filter with All, Crop, Soil, Yield or Notes. The ••• menu has Livestock, Recommendations, Zones, Legacy notes, Show all and Field notes (the paddock's written field notes). Tap a line to open it.

See how much nitrogen has gone on

Open the paddock's Plan tab. Under the crop line, four rings, N, P, K and S, show kg/ha applied from completed passes against what the plan holds. A ring that goes past the plan runs a second, darker lap and says how far over, such as "19% over". Open the strip to see which passes bring each nutrient, the total kg applied, and any other nutrient the plan holds. Kilograms of N per hectare are units of N, so 100 kg/ha of urea is 46 units. "No analysis in Phase for …" names any product left out. To compare paddocks, use Compare → Nutrition in Crop Plan Studio (the Plan page).

What you can do here

  • Add a pass with Add, or change a rate, date or product: see Change one paddock's plan on its Plan tab. Every pass shows its date, the water band (water rate, droplet and nozzle) on a spray, each product with its rate and cost, and its other details as small labels, each with a pencil to change it. Add and Edit under the products open the step-by-step card on the pass. Its ••• menu has Edit this pass…, Mark done…, Assign to someone…, Copy this pass to paddocks…, Save as template and the rest.

  • Record work as done with Mark done: see Mark work as done. Completed work shows the weather recorded with it.

  • Fix what was applied or reopen a finished activity: see Fix what was applied, or reopen a finished job.

  • Write a recommendation with New reco at the foot of the sheet (or Plan tools → New recommendation), or review one waiting in the plan at its due date: see Write, send and act on recommendations.

  • Copy the plan to other paddocks or save it as a template from Plan tools: see Save and apply plan templates.

  • Mark an event such as a lime spread on a soil chart: tap the reading's row on Soil, then Add marker. See Use soil data on the paddock, in Compare and in Spatial.

  • Get directions to the paddock: open the crop line's Details, tap Locate, then Navigate in Phase or Open in Google Maps. The paddock needs a boundary or a pin.

If the wrong paddock opens or a tab looks empty

  • I can't find a button that used to be there. Open the pass. Its date, water and note are changed by tapping them; there is no Edit button any more. Remove on a product is in the product row's ••• menu. The crop's Colour and Locate are under Details on the crop line.

  • The wrong paddock opens. Tap inside the paddock's boundary. If two boundaries overlap or one is missing, fix it first in More → Farms & Fields (see Draw, import or export paddock boundaries).

  • A tab looks empty. Check the season in the header: plans, activities and yields belong to a season.

  • The sheet says "Crop not set". The paddock's plan has no crop for this season. Set the crop in Crop Plan Studio, or mark it Not cropped this season…, for example as fallow (see Clear a plan or mark a paddock not cropped).

Who can use it

Anyone on the farm can open the sheet. Changing the plan, marking work done, writing recommendations and adding Notes each need that permission in the person's role: see Change someone's role and what they can see.

Did this answer your question?