A John Deere harvest job comes into Reconcile with the yield, moisture, crop and variety the combine measured. You can correct the crop or variety, then confirming it saves the paddock's yield. Every John Deere job can also bring the diesel the machine burned and maps of the work: what was applied, the target rate, yield, diesel use and ground speed.
Before you start
Reconcile is at More → Daily work → Work reconcile → John Deere, on Phase Ultra or the free trial, with John Deere connected. See John Deere Operations Center.
Diesel and job maps use the same John Deere access as yield maps, so they need Phase Ultra too. They add nothing to the farm's John Deere costs.
Job maps need the paddock to have a boundary in Phase.
Read a harvest job
A harvest has no inputs to match, so a John Deere harvest job shows a Harvest panel where other jobs have Match the machine products:
Yield in t/ha, Moisture, and Grain (yield × area harvested, in tonnes), on one row.
Crop and Variety on the row below, each saying where it came from: From your plan, As John Deere named it or Set by you. A variety matched to your plan shows your plan's name, so "VORTEX" from the combine reads "LRPB Vortex", with John Deere's name beside it.
A paddock harvested with two varieties shows Varieties, with each one's area, yield and moisture; the paddock's figure is the average across them. Varieties the combine had loaded but never harvested on that paddock are left out.
A harvest doesn't ask you to pick a plan activity. If the plan has a harvest pass (a contract harvest cost, say), the job links to it; otherwise it records as its own harvest, without a warning. The queue row shows, for example, "Wheat · LRPB Vortex · 4.65 t/ha · 11.7% moisture" with Records as its own harvest. Varieties are not treated as products, so harvests don't show as Unmatched because of them.
Correct the crop or variety
Use this when the combine was left on last season's crop, or the paddock was sown to something other than the plan.
Open the harvest job in Reconcile and select Change crop or variety.
Pick the Crop and the Variety, from the same pickers as the crop plans.
Select Save. The job keeps your change, marked Set by you.
Use what the combine logged, under Change crop or variety, puts the combine's names back. When you confirm, your crop and variety are saved to the paddock's yield and its yield map is filed under them. Where the combine logged several varieties, a variety you set is recorded as the paddock's one variety, not an average. A confirmed job can't be changed here: correct it in Yield Centre → Yield → Records. CNH FieldOps harvest jobs work the same way.
Confirm a harvest job
Open the harvest job in Reconcile.
Check Yield, Moisture, Crop, Variety and Area harvested.
Check whether it says Paddock harvested or Still being harvested.
Select Confirm job, then Save confirmed job.
Confirming saves the yield, moisture, crop and variety to the paddock's yield for the season in the Yield Centre (with two or more varieties, the paddock average). Nothing is saved to the paddock's yield until you confirm. If John Deere sent no yield, the job records as a harvest without a yield figure.
While the job waits, the Yield Centre already shows the header's figure on Overview and Yield, marked not reconciled (for example Header · John Deere · not reconciled), on the area cut so far. Reconcile on that harvest in the Yield Centre brings you back here. Once you confirm, the mark goes and the confirmed figure is the one used. Fix a wrong paddock, crop or variety here in Reconcile, not in the Yield Centre.
Confirming doesn't log harvest loads or put grain into a silo or shed. For that, see Log a harvest load.
A paddock still being harvested
John Deere keeps one harvest job per paddock and crop, and adds to it until the paddock is finished. Until the job covers 85% of the paddock's cropped area it says Still being harvested with how much is done, for example "2.7 of 39.5 ha (7%)", and its yield is the part done so far. Grain reads Grain so far.
It is never Ready, and Confirm ready jobs lists it unticked with "Still being harvested, so its yield is only the part done so far".
You can still confirm it by hand. The yield record's notes then say how much of the paddock had been harvested.
A paddock with a lot of uncropped ground and no arable area set may stay "still being harvested". Set its arable area (see Draw, import or export paddock boundaries), or confirm it by hand.
The yield map after you confirm
Confirming a finished harvest also asks John Deere for that paddock's yield map, as Yield Centre → Actions → John Deere yield maps does for a whole season. A message says it has been asked for. It usually lands on the paddock's yield record for the season in the Yield Centre within about a quarter of an hour, or up to an hour if John Deere hasn't built it yet.
No map is asked for when the paddock is still being harvested (get it later from John Deere yield maps), or when the paddock already has a map for that season and crop. The Harvest panel says which applies. If the map can't be asked for, the harvest is still confirmed and the message points to John Deere yield maps. For many paddocks at once, see Import yield data.
Diesel for each job
A John Deere machine logs what it does every second it works. Phase reads that in the background and puts it on the job in Reconcile.
When it is read. Jobs from the last fortnight are read as soon as they come in. Older waiting jobs fill in overnight, newest first, up to 30 a farm a night. Confirmed and ignored jobs are skipped.
To get one job's diesel sooner:
Open the job and select More details.
In Machine, select Get the diesel John Deere logged. It goes ahead of the overnight jobs and takes a few minutes. If it fails, select Try again for the diesel John Deere logged.
What you see. The Machine section says, for example, "John Deere logged 19 L over 51.4 ha · 0.37 L/ha · 30 L/h while working". Diesel L/ha is filled in with that figure ahead of the plan or the machine's usual figure, marked diesel measured by John Deere. A number you type still wins, and confirming records the measured diesel.
It only covers diesel burned while working: not driving between paddocks, filling up or idling.
Some machines don't log diesel. Then the job says "John Deere has no diesel for this job: the machine did not log it." and keeps the planned figure.
Jobs you combined by hand add up every pass. A job that grew while waiting has its diesel read again; confirmed jobs keep theirs.
Reports → Records and production → Machine Use says which machines' diesel was measured by John Deere, for example "Diesel measured on 12 of 15 jobs". See Print spray records and machine use reports.
Job maps
The same data draws maps of the job on the paddock. Small maps sit above the products on a spray, seeding or spreading job, and in the Harvest panel on a harvest, each with its lowest and highest reading. Select one to open it large on the paddock outline, with a colour key, a switch between the job's maps, and Open in Spatial.
Map | What it shows |
Applied | What the machine put out, section by section. A spot spray shows the share it sprayed, for example "Applied on 31% of the ground". A pass with two products, such as seed and fertiliser, has a map for each. |
Target | On a variable-rate job, the rate the machine was asked for, so you can see whether the prescription was followed. |
Yield | Harvest jobs: the yield John Deere logged, in t/ha, cleaned by the same rules as a paddock's yield map. |
Diesel use | Litres per hectare. Heavy ground, slow passes, hills and turns burn more. Most telling for seeding, tillage and harvest. |
Ground speed | How fast the machine went, in km/h. |
John Deere sends no unit with applied and target rates, so Phase takes it from the job's water rate or product rates, or shows the numbers without a unit rather than guessing.
In Phase Spatial. Every job's maps are also on the Layers step under John Deere jobs, each marked John Deere, and on the Zones step under Machine job maps, ready to build a zone map from. A harvest from a combine with a protein sensor also has a Protein map there, beside Yield; it is only in Spatial, not in Reconcile. The ground height the machine logged becomes the paddock's elevation layer. See Bring data into Phase Spatial.
Good to know
A job gets maps only on a paddock in Phase with a boundary, when the work lies on that paddock. Otherwise the litres are still recorded. A job that came in without a paddock gets its maps a few minutes after you match it or pick the paddock at confirm.
Each square is about a pass wide (12 m, wider for wide machines). Time stopped, such as filling the box, is left off so it doesn't paint a hot spot. Cleaning the Yield map never changes the diesel or speed maps, or the paddock's yield figure.
Reading a job's data again replaces its maps. Jobs combined by hand have a map for each pass in Spatial, but no small maps in Reconcile.
A job read before a kind of map (or the cleaning) was added gets it next time its data is read. Support can read a job again sooner.
If something doesn't look right
No diesel or maps yet. A job older than a fortnight fills in overnight, or select Get the diesel John Deere logged. Check the paddock has a boundary.
A finished paddock still says "Still being harvested". Set its arable area, or confirm the job by hand.
The yield map hasn't arrived. Allow up to an hour. Then open Yield Centre → Actions → John Deere yield maps: a paddock showing Did not finish under On the way from John Deere has the reason beside it.