Skip to main content
All CollectionsJavelin Bipods
Javelin Pro Hunt Tac - Product Guide
Javelin Pro Hunt Tac - Product Guide
Updated over 4 months ago

1. In the Box

The bipod kit comes with everything you need to install the bipod onto rifles with conventional sling studs.

  • Javelin Pro Hunt Tac Bipod

  • Classic Rifle Adapter Kit

2. Installation

In the normal case of events, installation is achieved by unscrewing the existing sling swivel stud and refitting the Classic Rifle Adapter in its place. Select the most suitable profile of synthetic plate, the correct size & length of the screw and finally use the 3mm hex key to tighten the adapter onto the rifle stock.

Please click the button below to visit the detailed instruction guide.

2. Operating Instructions

Attaching and Removing the Bipod
To attach the bipod, align the spigot with the slot on the adapter. The magnet will assist and secure the bipod in place. To remove it, firmly pull the bipod downwards from the adapter.


Pan and Lock Function
Insert the bipod with the lever facing away to enable 30° panning for tracking targets. Insert with the lever facing toward you to lock the pan movement.

Cant & Locking Lever
Pushing the cant lever to the left will allow you to lock the cant angle at the desired position. If you would like to change the position of the lever to adjust the lock position or for fine-tuning, pull the lever outwards and rotate it to the desired position.


Leg Lock-Out
The mechanical leg lock-out secures the legs in the shooting position. Press the button to release and fold the legs.


Leg Height Adjustment
Depress the spring-loaded lever and adjust the lower leg to the desired height. The internal springs facilitate smooth adjustments, even when prone.


Changing Legs
The body of the Javelin Bipod features our threaded M14 leg design, allowing the legs to be easily removed by rotating them counterclockwise. The Javelin is compatible with the full range of Spartan M14 legs, enabling you to tailor the bipod for different shooting stances and environments.

Feet
The bipod is equipped with a tungsten carbide tip and tethered synthetic boot. Remove the boot by gently pulling it off to reveal the tungsten tip.


Need More Help?

If you have any questions, concerns, or issues, please don't hesitate to contact us at: help@javelinbipod.com

Did this answer your question?