All Collections
Javelin Bipods
Javelin Pro Hunt Tac - Product Guide
Javelin Pro Hunt Tac - Product Guide
Nick Bailey avatar
Written by Nick Bailey
Updated over a week ago

In the box

The bipod kit comes with everything you need to install the bipod onto rifles with conventional sling studs.

  • Javelin Pro Hunt Tac Bipod

  • Classic Rifle Adapter

  • 6 x Ferritic Steel Screws

  • 3 x Synthetic Mounting Plates

  • 3mm Hex/Allen Key

Installation

In the normal case of events, installation is achieved by unscrewing the existing sling swivel stud and refitting the Classic Rifle Adapter in its place. Select the most suitable profile of synthetic plate, the correct size & length of the screw and finally use the 3mm hex key to tighten the adapter onto the rifle stock.

Check that your sling stud is not bonded in place! Manufacturers & dealers will be able to advise you if you have any doubts about your specific rifle.

If this option isn't working for you, we have an article that looks at other options for fitting the Classic Rifle Adapter.

Alternatively, you can check our full range of adapters, including options for Picatinny, M-Lok & Key Mod rails.

Operating Instructions

Attaching and removing the bipod

To attach the bipod to the rifle, locate the bipod's spigot into the slot on the adapter. The magnet will ease this process and retain the bipod in the adapter. To remove the bipod from the rifle, firmly pull the bipod downwards from the adapter.

Inserting the bipod in the adapter with the lever facing away from you will allow you to pan the rifle 30° left and right, meaning you can track moving targets. Inserting the bipod into the adapter with the locking lever facing towards you will lock the pan movement.

Cant & Locking Lever

Pushing the cant lever to the left will allow you to lock the cant angle at the desired position. If you would like to change the position of the lever to adjust the lock position or for fine-tuning, pull the lever outwards and rotate it to the desired position.

Leg Lock-Out

The mechanical leg lock-out holds the legs open in the shooting position. Press the button to release and close the legs into the folded position.

Leg Height Adjustment

To adjust the leg length, simply depress the spring-loaded lever and move the lower leg section to the desired height and release pressure on the latch. The internal springs assist and make it a smooth and easy process even when prone.

Changing Legs

The legs from the Javelin Pro Hunt Tac Bipod can be unscrewed by rotating them anti-clockwise.

Our Pro legs, with a ground clearance of 19.5" to 42" are perfect for predator hunters and seated shooting scenarios that require additional height and adaptability.

Feet

Each bipod is fitted with a tungsten carbide tip and tethered synthetic boot. Gently pull off the synthetic boot to expose the tungsten tip.

Compatible Accessories

FHF Bipod Holster

Replacement Feet/Tips

Pro Legs 19" - 42"

Did this answer your question?