1. In the Kit
Your kit includes all the essential components for setup and use. Additionally, two optional parts are provided, allowing you to customize your setup according to your height preferences.
Front Pre Assembled Top Section
Rear Pre Assembled Top Section
4 x Leg Sections
4 x Leg Extensions
2 x Foot Joints
Torx Key
Storage Bag
2. Setup Process
Step 1: Attach Leg Sections
Insert the threaded end of a leg section into the corresponding leg slot on the preassembled top section.
Rotate the leg section clockwise until it is securely tightened.
Repeat this process for all four leg sections.
For shooters over 6 feet, install the leg extensions first.
Step 2: Attach Foot Joints
Use the appropriate tool to loosen the grub screw. Do not remove it completely; just loosen it enough for insertion.
Ensure you align the correct leg. The foot joint must connect with the designated leg on each top section.
Step 3: Secure Legs
Ensure the screws are tightened sufficiently to prevent any movement of the legs.
Step 4: Optional V-Cradle
The Spartan MagnaSwitch Spigot can be removed for users who don’t have a Spartan adapter installed.
Using the appropriate tool, unscrew the grub screws until they are fully loosened, then remove the spigot.
Insert the V-Cradle into the housing.
Tighten the grub screws to secure the V-Cradle in place. Ensure they are firmly tightened to prevent any movement during use.
Need More Help?
If you encounter any difficulties or have any further questions, please don't hesitate to contact us at help@javelinbipod.com