The Tended device is built to keep you safe so you can carry out your work knowing you are not putting yourself in danger. This article covers:
Diagram of the Tended device
Device lights (LEDs)
The main LED (4) on the front of the device below the buttons will flash to indicate that you have stepped out of the safe zone and are in danger.
Warning: Do not look directly into this LED when flashing as it is very bright.
The device also has three smaller LEDs (2) on the front to indicate the status:
Power
Positioning
WiFi/Cellular connectivity
These LEDs will change colour or be solid/flashing depending on different statuses of the Wearable.
Find more out about the device LEDs here 👈
Buttons
Left-hand button - On/off Holding this button will turn the device on and can be held down again to turn it off
Middle and right-hand buttons - Currently these buttons do not have a function.
Any questions or issues?
We're here to help! Simply pop us an at email support@tended.co.uk, WhatsApp us on 07713682625 or drop us a message via live chat from the blue bubble in the corner of this page or within the Dashboard 😊