Before you can use your device on-site you'll need to connect it to your site's safe zone information from the Tended Dashboard.
Please note: sites will need to be started on the Dashboard before your device(s) will connect. Find out more here 👈
LEDs on the device
Please see the below diagram of the three indicator LEDs on the device:
Get started with your device
Please note: You should be outside with a clear view of the sky when turning the device on. It will not work inside buildings or under tunnels/covers.
Turn on the device by holding down the left-hand button for 3 seconds.
The device will play a short audio alert as it turns on.
The battery LED (A) will then light up and the connectivity LED (C) will start to flash.
Wait for the connectivity LED (C) to stop flashing.
The positioning LED (B) will then start to flash.
Wait for the positioning LED (B) to stop flashing.
Once all three (A, B and C) are solid green the Wearable has synced all safe zones.
You can now attach your device and get started. The device will play four short consecutive audio alerts to let you know when you've entered the safe zone.
Find out more about alerts here.
Any questions or issues?
We're here to help! Simply pop us an at email support@tended.co.uk, WhatsApp us on 07713682625 or drop us a message via live chat from the blue bubble in the corner of this page or within the Dashboard 😊