Epson L100 Label Printer Overview
The Epson L100 label printer is now integrated with Toast Mobile and is discoverable in-app. However, Toast does not currently sell this product; it must be obtained through a third-party vendor.
Toast provides limited support for the Epson L100 label printer, including the following:
Initial setup - Printer Setup Overview
Connecting to the Toast Network
Configuring in Printer Setup
Disabling the taken sensor
Note: This model of the Epson L100 requires an Ethernet connection.
If the printer fails after completing the setup steps, you must troubleshoot the issue with your own IT resources. Toast will begin selling the Epson L100 Label Printer in early 2026. Some businesses are already using this printer successfully.
Disable the Taken Sensor on the Epson L100 Label Printer
These printers, if purchased from a third-party source, will come with a sensor enabled, called the Taken Sensor. If it is enabled, it will not print another label until one is pulled. The Toast app will indicate that the printer is busy. or offline, when this happens. To disable the taken sensor:
Power off the printer, press and hold the FEED button, and power on the printer; the self-test page is printed.
Press and hold the FEED button again until the Mode selection page is printed.
Press the FEED button 2 times and then hold it to select 2. Customized Value settings.
Press the FEED button 13 times and then hold it to select 13. Other settings.
Press the FEED button 5 times and then hold it to select 5. Paper removal standby.
Press the FEED button 2 times and then hold it to select 2. Disable.
Once the setting is changed, power off and on the printer, and the change will be applied.
Disable the Printer Buzzer for the Epson L100 Label Printer
Another setting that often comes standard is the buzzer. If you do not want a buzzer, follow the steps below.
Power off the printer, press and hold the FEED button, and power on the printer; self-test page is printed
Press and hold the FEED button again until the Mode selection page is printed.
Press the FEED button 2 times and then hold it to select 2. Customized Value settings.
Press the FEED button 13 times and then hold it to select 13. Other settings.
Press the FEED button 5 times and then hold it to select 8. Select buzzer.
Press the FEED button # times and then hold it to select Buzzer Disable.
Once the setting is changed, power off and on the printer, and the change will be applied.