Cleaning Preparation: Power off your Hydropixel completely before starting the cleaning process
Cleaning Steps:
Water Catch Tray
Remove the water catch tray located at the front of the machine
Rinse with warm water and a non-chemical cleaning agent
Dry thoroughly and replace
Side Service Panel
Open the side panel
Use a clean cloth to dust the bottom
Avoid touching mechanical parts
Top Panel
Use a #1 Phillips screwdriver to remove screws at top left and back right
Carefully remove the top panel
Wipe away visible dust with a clean cloth
Clean inside the dispensing system
Top Tank
Clean out the top tank of the aquarium machine
Bottom Panel and Tank
Remove the bottom panel
Wipe away any visible dust
Remove the bottom tank
Clean out the tank
Replace both tanks and reassemble the system
By following these steps, you'll ensure your Hydropixel remains clean, functional, and efficient.