Skip to main content

Assembly Settings

Set up racks, barcode scanning and automation for assembling orders.

Written by Rafael

Go to More > Store Settings > Workflow > Assembly to set up how garments are racked and tracked through assembly.

These settings control how the Assembly page assigns racks and moves orders on. Assembly works best if you use one-time garment tags with barcodes or heat seals to track individual garments.

Configuration

  1. Turn on Use Assisted Assembly.

  2. Enter the Number of Rack Locations. This is the total number of racks you have.

  3. Enter the Pieces Per Rack Location. This is the most garments CleanCloud will put on one rack. When a rack reaches this limit, extra garments go on another rack, even if they’re from the same order.


Automation Rules

  • Remove Order from Assembly When: Choose when an order leaves the Assembly page and its rack is cleared.

    • Order Cleaned: The order leaves once it’s marked as cleaned.

    • Order Completed: The order stays on the Assembly page until it’s marked as completed.

  • Automatically Mark Order as Cleaned if All Garments Scanned: Choose Yes to mark the order as cleaned and move it to the Ready page when you scan its last garment.

  • Automatically Print Receipt if All Garments Scanned: Choose Yes to print a receipt when you scan the last garment.


Garment Barcode Labels

  • Use Pre-Printed Barcode Labels: Toggle on to use barcode labels that have already been printed onto your garment tags.

  • Save Upcharges to Heat Seal Labels: Toggle on to save upcharges to heat seal labels.

  • Barcode Formats: Set the length and first digits of the barcodes CleanCloud accepts when you scan garments. Select Add Format to add a format for each set of pre-printed tags you use, plus one for the labels this store prints itself. Each format has these fields:

    • Type: Select Pre-printed for tags you buy on a sheet that are already numbered. Select Printed for labels this store prints itself, numbered from the start number onwards. You can only set up one printed format.

    • Barcode Length: How many digits your barcode has. For example, if your barcodes look like 8000000001, the barcode length is 10.

    • Barcode First Digit(s): The first digit or digits of your barcodes. For example, for 8000000001, enter 8. The first digits can be anywhere from 1 to 99. We don’t recommend 0 as a first digit.

    • Start Number: The first barcode this store will print. Write it in full, exactly as it should read on the label. For example, with a barcode length of 10 starting with 8, enter 8000000001.

Note: Printing barcode labels from your own printer is coming soon. You’ll set it up in Hardware Settings.

Did this answer your question?