Skip to main content

Label Printing with Zebra Printers

Updated over 2 weeks ago

Thanks for the clarification! Here’s the revised version of your Zebra Printer Setup help doc in your preferred Intercom-style format, with a placeholder link to the future troubleshooting article:


On this Page

  • Step-by-Step Zebra Printer Setup

  • Connect Zebra Printer to Corksy

  • Additional Support


Step-by-Step Zebra Printer Setup

Zebra printers work with Corksy for seamless 4x6 label printing. To get started, follow the steps below using Zebra Browser Print.


1. Download and Install Zebra Browser Print

  • Visit the Zebra Browser Print page

  • Choose the download for your operating system (Windows or macOS)

  • Enter your name and email to start the download

  • Run the installer and follow the prompts to complete installation


2. Add Your Zebra Printer

  • Launch the Zebra Browser Print application

  • Make sure your Zebra printer is powered on and connected (via USB or local network)

  • Select your printer from the list of available printers

  • Save your printer settings within the Browser Print app


Connect Zebra Printer to Corksy

  1. Open Corksy in your browser

  2. When prompted, allow Corksy to access your connected printers

  3. Once access is granted, your Zebra printer should appear in the list

  4. Select the ZPL option to enable 4x6 label printing


Additional Support

If you experience issues connecting or printing, please refer to our Zebra Printer Troubleshooting Guide
For further assistance, contact: hardwaresupport@corksy.io

Once setup is complete, you’ll be ready to print 4x6 labels directly from Corksy with ease.

Did this answer your question?