Skip to main content

Compare Shadows

See the shadows your proposal adds to the site

Written by Holly Conrad Smith

Planners and neighbors want to know what a new building adds to the shadows already on the ground. Compare mode answers that. It colors each shadow by what casts it, so you can see the new shadow your proposal adds apart from the shadow that existing buildings cast today.

Compare existing and new shadows

  1. Open the Solar app and click Compare at the top.

  2. Set the date and time under Date and Time. Many rules use the winter solstice, so click Go to the winter solstice to start there.

  3. Read the shadow key under Shadows. Each color in the key shows the area of that kind of shadow.

What each shadow color means

Compare mode colors each shadow on the ground by what casts it:

  • Existing shadow (grey): an existing building shades this ground today, and the ground stays shaded after your proposal.

  • New shadow (pink): your proposal shades this ground, and nothing shaded it before.

  • Overlap (already shaded) (purple): your proposal shades ground that an existing or demolished building already shades.

  • Removed shadow (demolished) (green): a demolished building shaded this ground, and nothing shades it after your proposal. This color only shows when the project has demolished buildings.

The area beside each color covers the ground within 200 m of your site.

Which buildings count as existing

Compare mode treats every geometry you draw as proposed, unless you mark it as existing or demolished. These count as existing buildings:

  • Buildings on the 3D Buildings layer, when the layer is shown on the map.

  • Geometries with a usage, or in a scenario, that you set as Existing in Solar settings.

To set which buildings are existing or demolished, click the pencil beside any color in the shadow key. Solar settings opens on the Existing and demolished tab. Learn more about marking existing and demolished buildings.

Show the shade a demolition removes

When your proposal replaces buildings on the site, mark them as demolished. Compare mode counts their shadows before the proposal and not after, so the shade your project takes away shows in green. Mark buildings as demolished in two ways:

  • Set a usage or a scenario as Demolished in Solar settings.

  • Clear 3D Buildings from your site with the layer's filters. While Demolish masked 3D Buildings is on in Solar settings, those buildings count as demolished.

Existing and demolished buildings cast shadows in Compare mode even when their scenario is hidden on the map.

Name the shadow under the cursor

Turn on Shadow at cursor under the shadow key in Compare mode, then move the cursor over the ground. A tag beside the cursor names the shadow there, such as New shadow, or says In sun. The tag shows over the ground only, and only while the Solar app is open on screen.

Make compare shadows lighter or darker

Set Shadow strength under Shadows to make the shadow colors in Compare mode lighter or darker. It goes from 0% to 100%, and 0% hides shadows.

Did this answer your question?