A design feasibility study shows a client what a site can hold and how well it works. You need a massing that respects every control and reads clearly in 3D and on paper. Giraffe lets you sketch inside the envelope and check sun and slope in one model that keeps its areas up to date as you design.
A design feasibility study in Giraffe usually runs in this order:
Set up the site. Create a project, then choose the units and area labels your drawings report in.
Map the controls. Add data layers like zoning and heritage overlays. Generate the allowable envelope, so you know the space a building can fill.
Sketch the massing. Draw basic shapes and turn them into floors with the Buildings tool. Follow a worked example for a 5 over 1 podium or a wrap building, and round off corners where the form needs it.
Respond to the site. Count the hours of sun on your landscape and facades, and see the shadows your proposal adds. On a slope, show the terrain in 3D and level building pads and ramps.
Test options. Hold each design option in its own scenario. Check each one's building areas against the controls.
Document and hand off. Lay out plans, elevations, and 3D views on drawing sheets and export a PDF. Export to IFC to carry the massing into your BIM tool.
Learn the core design workflow step by step if you're an architect new to Giraffe.