Skip to main content

Download Terrain

Download contours, cut and fill volumes, and a 3D model of the ground

Written by Holly Conrad Smith

Your engineer, your surveyor, and your cost plan all need the ground you tested in Giraffe. Download the terrain's contours for CAD or GIS software, the cut and fill volumes as a spreadsheet, or the ground as a 3D model.

Download contours

Download the terrain's contours as a GeoJSON file to use in CAD or GIS software. Click 3D in the Terrain app to turn terrain on. Then click the More options button (three dots) at the top right of the Terrain app, and choose one:

  • Download contours (GeoJSON): the ground after cut and fill.

  • Download original contours (GeoJSON): the ground before cut and fill.

Both options are greyed out while the terrain loads. Giraffe names the file after your project, such as "Hillside contours.geojson".

What's in a contours file

A contours file holds a line for each level on the ground. The lines are spaced by the Contours interval under Display in the Terrain app, even when Contours is turned off. Each line has two properties:

  • elevationDatum: the line's level, in meters, even when your project uses feet.

  • major: true when the line falls on a Major contours level. Every line is false when Major contours is off.

The lines are 2D, in longitude and latitude. Use elevationDatum to set each line's height in your CAD or GIS software.

When Clip to boundary is on, the file holds only the lines inside your project boundary. When it's off, the file covers all the terrain Giraffe has loaded around your site. Raise Tile buffer to load more ground. Set both under Display in the Terrain app.

Download cut and fill as a spreadsheet

Download the cut and fill for every pad and ramp as a CSV file to use in a spreadsheet or cost plan. Click the More options button (three dots) at the top right of the Terrain app and choose Download cut and fill (CSV). The option is greyed out until the project has a pad or ramp.

The file has a row for each pad and ramp in the Volumes table, then a Total row. Pads and ramps on hidden layers are left out. The columns are:

  • Building ID: the ID of the pad or ramp.

  • Feature: the pad's or ramp's usage, or Pad or Ramp.

  • Level: the pad's level, or the ramp's start level.

  • End level: the ramp's end level. It's blank for pads.

  • Cut: the earth dug out.

  • Fill: the earth added.

  • Net: fill minus cut.

Levels and volumes follow your project's units, and each column heading names its unit, such as "Cut [m³]". Giraffe names the file after your project, such as "Hillside cut and fill.csv".

Download the terrain as a 3D model

When terrain is on, every 3D model you export includes the ground. Click the Project menu, point to Export, and choose STL (CAD mesh format), OBJ (CAD mesh format), or GLTF/GLB (3D format). Each 3D export format suits different software.

The model shows your geometries on the ground after cut and fill. The ground covers all the terrain Giraffe has loaded around your site, so it can reach past your project boundary. To export your geometries without the ground, click Flat in the Terrain app first.

Did this answer your question?