Skip to main content

How to take the Handy apart

Guidance on how to dissemble the Handy for access to it's internal parts.

Updated over 11 months ago

⚠️ Please keep in mind that opening the Handy voids the warranty on the device, you do so at your own risk.

If your device is still under the 1-year warranty, please contact support on the chat box on the bottom right or through the email contact@thehandy.com

Before you start, have a 2.5mm hex screw driver available.

How to open:

  • Remove the bottom rubber cover (the one with text). It’s glued on securely.

  • Unscrew the 3 screws that are revealed using a 2.5mm hex screw driver

  • Remove the bottom plastic part

  • Slide the slider all the way to the top to remove the top part

How to assemble:

  • Set the front and back parts together. Be very careful that no wires are stuck in-between these parts.

  • Put the slider on the lead screw.

  • Put on the top part

  • Put on the bottom part. Be very careful not to damage the motor wires.

  • Screw in all the screws.

  • OPTIONAL: Glue the bottom cover back on.

Did this answer your question?